Overview
Description
The ZMOD4410 gas sensor module is an easily integrated firmware configurable architecture enabling multiple sensing solutions with a common hardware platform. Simply download one of the firmware libraries that best supports your application from the Renesas website and integrate it with your host microcontroller. The JEDEC JESD47 qualified device supports 10+ years of life, supporting your indoor air quality (IAQ) application designed for detecting total volatile organic compounds (TVOCs), estimating CO2, and monitoring indoor air quality in different smell-based use cases, including very humid and dusty applications with the possibility of water spray, condensation or immersion. The miniature 12-LGA assembly consists of a gas sense element and a CMOS signal conditioning IC. The sensor is pre-calibrated with a signal conditioner controlling the sensor temperatures and measures the MOx conductivity, which is a function of the gas concentration. The measurement results can be read via an I2C interface with the user’s microprocessor, which processes the data. The ZMOD4410 is ideal for applications such as air purifiers, IAQ monitors, kitchen hoods, HVAC equipment, building controls, thermostats, smart fans, and other smart devices.
Features
- JEDEC JESD47 qualified for 10+ years of life
- Firmware configurability output based on AI machine learning algorithmic:
- Absolute measurement of total organic compounds (TVOCs) concentrations and indoor air quality (IAQ)
- Estimated carbon dioxide level (eCO2)
- Relative control signal to trigger an external action based on IAQ and odor change
- Algorithm to discriminate sulfur-based odors
- Built-in nonvolatile memory (NVM) for module-specific data (configuration and calibration)
- Ultra-low average power consumption down to 160µW supporting battery applications
- Siloxane resistant
- Supply voltage: 1.7V to 3.6V
- RoHS compliant
- Water and dustproof version available (IP67 certified)
- 12-LGA package with assembly sizes:
- 3.0mm x 3.0mm x 0.7mm (standard version)
- 3.0mm x 3.0mm x 0.9mm (for IP67 version)
Comparison
Applications
Design & Development
Software & Tools
Boards & Kits
Evaluation
ZMOD4410-EVK
Obsolete
Indoor Air Quality Sensor Evaluation Kit
The ZMOD4410-EVK simplifies the evaluation of the ZMOD4410 Indoor Air Quality (IAQ) sensor. This sensor module is supported with the firmware to operate the sensor in multiple modes: IAQ 2nd Gen, Ultra-Low Power mode, and PBAQ1. Depending on the selected mode, the output can be displayed as a...
Recommended Documents:
Evaluation
US082-ZMOD4410EVZ
Active
TVOC and Indoor Air Quality Sensor Pmod™ Board (Renesas QuickConnect IoT)
The US082-ZMOD4410EVZ board enables quick prototyping of the ZMOD4410 gas sensor module for indoor air quality (IAQ) in a custom system design. The board provides a standard Pmod™ Type 6A (Extended I2C) connection for the on-board sensor to plug into any required MCU evaluation kit with a...
Recommended Documents:
Evaluation
EU045-EVK
Active
Air Quality Sensor Evaluation Kit
The Renesas EU045-EVK air quality sensor kit provides real-time data about the current environmental conditions to demonstrate the use of Renesas’ ZMOD gas sensors and relative humidity/temperature sensor in an easy-to-use application. Its Bluetooth® 5.0 communication allows nice and easy...
Recommended Documents:
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Models
| Model - Other | ZIP 131 KB | |
1 item
|
||
Product Options
Applied Filters:
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Support Communities
-
ZMOD4410 - 3d Printing
Hi, Greetings to everyone! I am doing a project where it involves measuring VOC levels emitted during 3D printing and I was thinking in using the ZMOD4410 for that. Anyone had any similiar experience? Thank you in advance. Best Regards, André Souto
May 24, 2021 -
Zmod4410 libraries
Hi, I'm trying to use the ZMOD4410 gas sensor with Microchip's PIC32MM0256GPM048 microcontroller, and I can't find the libraries to make it work. I would appreciate if someone could help me, or at least tell me how I can contact IDT to solve this problem. Thank you.
Oct 8, 2020 -
EK-RA6M4 + ZMOD4410 PMOD
Hi Folks, I'm a pretty new user so I have been working through tutorials and examples. However, I have run into a problem running the ZMOD4410_RA6M4_NonOS demo code. I can't seem to get any data through to the expressions window in e2 studio after rechecking my ...
Jan 31, 2024
FAQs
-
RRH46410/ZMOD4410 Temperature and Humidity Compansation Mechanism
A sudden high increase in temperature and humditiy can show a false positive TVOC response if not compensated for. For both values a baseline is created without any decay (like for the Rmox baseline). For each data sample the algorithm checks for an increase of RH/T value. In ...
Jan 27, 2025 -
RRH46410/ZMOD4410 Combine Different Firmware Examples And Algorithm Libraries
... Low Power Firmware and other modes. Answer: No, it is not possible to combine the different operation modes (IAQ 2nd Gen, ULP and PBAQ). When switching between the three modes it is recommended to use a new sensor because the sensor material memorizes the operation mode. Suitable Products RRH46410, ZMOD4410
Jan 1, 1970 -
ZMOD4410 Resolution
The output variables are floating point values and have the resulting resolution. However we recommend the resolutions provided in the print of the example code: The resolution for IAQ is 0.1 (IAQ level), for TVOC 0.001 mg/m3 and for eCO2 1ppm, respectively. However, the resolution of ...
Jan 1, 1970