Features
- Input Offset Voltage: ±1 mV (TYP.) (±2.5 mV MAX.)
- VIO Temperature Drift: ±7 µV/°C (TYP.)
- Input Bias Current: 50 pA (TYP.)
- Slew Rate: 25 V/µs (TYP.)
- Unity Gain Frequency: 6 MHz (TYP.)
- Input Equivalent Noise Voltage Density: 19 nV√ Hz (TYP.) (f = 1 kHz)
- Stable operation against capacitive load: (Capacitive Load at 220 pF, AV = +1 )
- Built-In Phase Compensation Circuit
- Built-In Output Short Circuit Protection
- Standard Single Op-Amp terminal connection (pin compatible)
Description
μPC813 is a high-speed version of μPC811. The J-FET input operational amplifier features a high-speed PNP transistor in the output stage for stable operation at a high slew rate of 25V/us with a gain of 1 (full feedback) The resistor-trimming method proven in other Renesas High-Precision Op-Amp and High-Precision reference voltage is incorporate in this Op-Amp input stage, thus producing an excellent low offset voltage characteristics that has surpasses conventional general purpose op-amp in spite of being JFET input. Under the same series, μPC814, 4094 with the same circuit configuration are also available.
Parameters
| Attributes | Value |
|---|---|
| Channels (#) | 1 |
| Temp. Range (°C) | -40 to +85, -40 to +85°C |
| Bandwidth (MHz) | 6 |
| Offset Voltage (Max) (mV) | 2.5 |
| IBIAS (nA) | 0.05 |
| CMRR (dB) | 100 |
| Rail-to-Rail Input | No |
| Rail-to-Rail Output | No |
| Common Mode Input Voltage Range (V) | 5 - 16 |
| IS per Amp (mA) | 2.5 |
| Single Supply Voltage Range (V) | 5 - 16 |
| Slew Rate (V/µs) | 25 |
| VS (Min) (V) | 5 |
| VS (Max) (V) | 16 |
| Topology [Rail 1] | - |
| Enable | - |
| Input Offset Voltage Vio (Max) (mV (±)) | 2.5 |
| Supply Current Icc/Idd (Max) (mA) | 3.4 |
| Qualification Level | Standard |
| Simulation Model Available | SPICE |
Applied Filters:
Loading