Features
- AEC-Q100 Compliance
- Input Offset Voltage: ±2mV (TYP.)
- Input Offset Current: ±5nA (TYP.)
- Large Signal Voltage Gain: 100000 (TYP.)
- Internal Frequency Compensation
- Output Short-Circuit Protection
Description
The μPC451A is a dual operational amplifier designed for single power supply operation. Main features include low-voltage operation, a common-mode input voltage that ranges from V− (GND) level, an output from a V− (GND) level that is determined by the output stage utilizing Class C push-pull circuit with 50μA (TYP. ) constant current, and low current consumption. In addition, this amplifier supports both positive and negative power supply and can be used in various amplifier circuits. The μPC1251A which is a dual type with the same circuit configuration is also available under this series of operational amplifiers.
Parameters
| Attributes | Value |
|---|---|
| Channels (#) | 4 |
| Temp. Range (°C) | -40 to +85, -40 to +125 |
| Bandwidth (MHz) | 0.8 |
| Offset Voltage (Max) (mV) | 7 |
| IBIAS (nA) | 15 |
| IOUT (A) | 0.02 |
| CMRR (dB) | 85 |
| Rail-to-Rail Input | No |
| Rail-to-Rail Output | No |
| Common Mode Input Voltage Range (V) | 3 - 30 |
| IS per Amp (mA) | 1.2 |
| Single Supply Voltage Range (V) | 3 - 30 |
| Slew Rate (V/µs) | 0.3 |
| VS (Min) (V) | 3 |
| VS (Max) (V) | 30 |
| Topology [Rail 1] | - |
| Enable | - |
| Input Offset Voltage Vio (Max) (mV (±)) | 7 |
| Supply Current Icc/Idd (Max) (mA) | 1 |
| Qualification Level | Automotive(AEC-Q100 Compliant) |
| Simulation Model Available | SPICE |
Applied Filters: