Features
- Optimized for Telecommunications Equipment, High‑performance Enterprise Computing, Motor Drives
- 13.1mΩ RDSON
- Maximum Continuous Current: 6A
- Wide Operating Supply Voltage: 4.5V to 22V
- Automatic nFET SOA Protection
- Four-level, Pin-programmable VIN Overvoltage Lockout
- Capacitor-adjustable Inrush Current Control
- Two-stage Current Limit Protection:
- Resistor-adjustable Active Current Limit
- Fixed 0.5A Short-circuit Current Limit
- Open Drain FAULT Signaling
- IDS Current Analog Output Monitor: 10μA/A
- ON-OFF Control: Active HIGH
- Operating Temperature:-40 °C to 85 °C
Description
The SLG59H1012V is a high‑performance, self‑powered 13.1mΩ NMOS load switch designed for all 4.5V to 22V power rails up to 6A. Combining novel FET design and copper pillar interconnects, the SLG59H1012V package also exhibits a low thermal resistance for high‑current operation. Designed to operate over a -40 °C to 85 °C temperature range, the SLG59H1012V is available in a low thermal resistance, RoHS‑compliant, 1.6mm x 3.0mm STQFN package.
Parameters
| Attributes | Value |
|---|---|
| FET Pass Device Type | Single N-Channel |
| VIN Channel 1 min. (V) | 4.5 |
| VIN Channel 1 max. (V) | 22 |
| Input Quiescent Current Channel 1, typ (µA) | 500 |
| Input Quiescent Current Channel 1, max (µA) | 600 |
| Input Quiescent Current when OFF Channel 1, typ (µA) | 1 |
| Input Quiescent Current when OFF Channel 1, max (µA) | 3 |
| RDSON (Typ) Channel 1 (mΩ) | 13.1 |
| IDS Channel 1 (A) | 6 |
| Enable | Active High |
| Output Voltage Slew Rate set by | Capacitor |
| Discharge Circuit | Yes |
| Undervoltage Protection | Yes |
| Over Voltage Protection | Yes |
| Power Good (PG), FAULT indicator | FAULT |
| Reverse current blocking | No |
| Reverse voltage detection | No |
| Over Current Protection (OCP) | Adjustable |
| Over Current Protection Setting Range Channel 1 | 1 - 7 |
| Short Circuit Protection | Yes |
| Over Temperature Protection (OTP) | Yes |
| Current Monitor Output | Yes |
| Internal TVS Surge Protection | No |
| Temp. Range (°C) | -40 to +85°C |
Applications
- Power-Rail Switching
- Multifunction Printers
- Large-format Copiers
- Telecommunications Equipment
- High-performance Computing 5V, 9V, 12V, and 20V Point‑of‑Load Power Distribution
- Motor Drives
Renesas Boards & Kits
SLG59H1012V Evaluation Board
The SLG59H1012V-EVB board evaluates the SLG59H1012V High Voltage GreenFET, Load Switch.
For details on how to use the evaluation board, please refer to the evaluation board user manual included in the datasheet.
Support Communities
-
SLG59H1012V
Hi, I have recently designed a PCB with 3 of these load switches. 2 of the switches work with no problems at all but the third one doesn't seem to work correctly. After looking at the output after switch on it appears that the output is rising but very ...
Dec 18, 2024
Support Communities
