Overview
Design & Development
Software & Tools
Sample Code
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
FAQs
-
Is it OK that AVcc pins and AVss pins are in the release state?
No, it is not OK. Do not put AVcc pins and AVss pins in the release state even when converter is not used. When A/D converter is not used, set as follows; AVcc=Vcc, AVss=Vss, AVref=Vcc. If the product has AVref pins, set as follows; AVref ...
Mar 23, 2009 -
Can the DMA transferring be suspended?
The conditions for suspension of DMA transferring are as follows; (1) Generating NMI interrupts. (2) Generating an address error by DMAC. (3) High level detection of DREQ#. (When it is detected in low level on external request mode) In cycle-steal mode, the suspension of DMA transferring is possible ...
Mar 25, 2009 -
Which mode should be used to perform synchronous operation?
MTU incorporates five channel timers consisting of channel 0-4. When performing 12-phase PWM output, set channel 0, 1, and 2 to PWM mode 2 and channel 3 and 4 to PWM mode 1. The output pins at this time are as follows; channel 0 : PWM mode 2 : TIOC0A ...
Mar 24, 2009