Overview
Description
RZ/N1S housed Cortex®-A7 and a large size of built-in RAM in a small package. Since peripheral parts can be reduced, it can be used for small PLC, HMI, etc. In addition, since it has a proven Renesas R-IN engine (“R-IN engine”) as an accelerator for industrial Ethernet communication, it can be used for protocol gateway, sensor hub, etc.
Features
- CPU：Cortex-A7 (500MHz), Cortex-M3(125MHz)
- Voltage: 3V for IO, 1.15V for CPU
- Package: 196 pin LFBGA (12 x12mm, 0.8 pitch), 324 pin LFBGA (15 x15mm, 0.8 pitch)
- Memory: SRAM 6MB with ECC
- Ethernet port: max 5
- Independent GMAC: max 2 (IEEE1588 Compliant)
- Security option: Available
- Ethernet Switch
- EtherCAT slave controller, SERCOSⅢ slave controller
- Others: PLL, RTC
Comparison
Applications
Design & Development
Software & Tools
Software & Tools
| Software title
|
Software type
|
Company
|
|---|---|---|
| Industrial Network Protocol Stack for RZ/N1 Supporting 6 industrial network protocol and reduce development resource by Common API.
|
Protocol Stack | Renesas |
| HW-RTOS HW-RTOS is a hardware real-time OS.
|
Other Hardware | Renesas |
2 items
|
||
Sample Code
Boards & Kits
Evaluation
IO-Link Master Development Kit
Renesas offers the RZ/N1S IO-Link Master development kit. This easy-to-use development kit contributes to shorter prototype-to-production process time and helps to reduce the development burden on engineers.
Components
- IO-Link Gateway development board
Sample Software
- Binary image of...
Development
YCONNECT-IT-RZN1
Active
CONNECT IT! ETHERNET RZ/N
CONNECT IT! ETHERNET RZ/N is the perfect solution kit for developers new to developing with the RZ/N1. The kit comes with not only an evaluation board but also a JTAG emulator and various sample software. By setting up the board according to the startup manual, you can evaluate Linux OS or...
Recommended Documents:
Demonstration
RA2E1 IO-Link Pressure Sensor Solution Demonstration Kit
This solution is a combination of the ultra-small and low-power consumption 32-bit RA2E1 MCU and the ZSSC3240 sensor signal conditioner (SCC) kit. It realizes pressure measurement and signal processing through IO-Link communication.
Development
RX23E-A-IO-LINK-TEMP-SENSOR
Active
RX23E-A IO-Link Temperature Sensor Solution Development Kit
This single-chip solution uses the 32-bit RX23E-A microcontroller with built-in high-precision analog front-end (AFE) to measure temperature, process sensing and signals, and control IO-Link communications via a ZIOL2401 IO-Link PHY chip.
Recommended Documents:
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Product Options
Applied Filters:
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Support Communities
-
Trouble with UART1 RX FIFO on RZ/N1S
I am having trouble getting UART1 to work on an RZ/N1S. The pinmux is setup for UART0_I on both GPIO82 and GPIO102 with GPIO82 being my TX GPIO102 being my RX line. I am able to send messages out of UART1 TX (GPIO82) just fine. But the ...
Jul 11, 2020 -
Trouble installing U-boot on RZ/N1S-DB
I am following the Quick Start guide for CONNECT-IT! ETHERNET RZ/N1S-DB and have reached the installation of U-boot. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------- I had the correct output ... ** BOOTLOADER STAGE0 for RZN1 ** And ran the command ... dfu-util.exe -D "u-boot-rzn1s324-db.bin.spkg" I believe that the ...
Jan 8, 2021 -
Trouble installing U-boot on RZ/N1S-DB
I am following the Quick Start guide for CONNECT-IT! ETHERNET RZ/N1S-DB and have reached the installation of U-boot. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------- I had the correct output ... ** BOOTLOADER STAGE0 for RZN1 ** And ran the command ... dfu-util.exe -D "u-boot-rzn1s324-db.bin.spkg" I believe that the ...
Jan 8, 2021