Overview
Description
The RZ/G3S microprocessor includes an Arm® Cortex®-A55 (1.1GHz) CPU, 16-bit LPDDR4 or DDR4 interface and low-power mode. It also has many interfaces such as PCIe, CAN FD, and 12-bit ADC, making it ideal for applications such as IoT edge applications.
As a software platform for this product, Renesas provides the Verified Linux package, which includes the Linux Kernel, middleware drivers, and basic software for this product. The Verified Linux package is verified and provided by Renesas.
Features
- Cortex-A55
- Cortex-M33 (Dual or Single) (one Cortex-M33 has FPU function)
- DDR4 or LPDDR4 Memory interface
- PCIe Gen2 1ch
- USB 2.0 interface 2ch, SD interface 3ch
- Gigabit Ethernet 2ch
- CAN interface (CAN FD) 2ch
- 12-bit ADC 8ch
- RTC, tamper detection
- Memory error detection/correction (ECC)
- BGA package (14mm x 14mm, 13mm x 13mm)
Comparison
Applications
Design & Development
Software & Tools
Boards & Kits
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Support Communities
-
RZ/G3S SCI Download mode (Due to parameter error) on start
Hello, I'm trying to Flash RZ/G3S board using the following manual: https://www.renesas.com/us/en/document/mas/linux-start-guide-rzg3s-board-support-package-v100 I was able to do all steps and boot up BSP linux from ...
Jan 29, 2024 -
Need help with the sequence of actions for programming the RZ/G2L
... I am just starting to work with Renesas processors, so I decided to follow the guide "RZ/G2L RZ/G2LC RZ/G2UL RZ/G3S. Getting Started with Flexible Software Package (R01AN5924EJ0210 Rev.2.10)", which describes working in Renesas development environment called e² studio. The guide ...
Feb 25, 2025 -
PMOD interface for Wifi with RZ-G2UL devkit
I am trying to connect a Renesas DA16600MOD (US159-DA16600EVZ) to a RZ-G2UL devkit using the PMOD-3A connector. The board is running the Renesas verified Linux environment. The default settings for SW1, SW2, etc which connect SER0_TX, SER0_RX, .. to the PMOD1 interface. However, looking at the ...
Jan 14, 2025
FAQs
-
RZ/G2L, RZ/G3S: How to increase Flash Writer transfer speed
It is possible to change the default (115200 bps) to a higher speed (921600 bps) using the "SUP" command.For detailed instructions, see "2.1.2.4. Writing the Bootloader" in the following document. RZ/G2Lhttps://www.renesas.com/us/en/document/qsg ...
Apr 26, 2024 -
RZ/G3S: Package
Support for PCI Express differs. When the PCI Express function will be used, select the 14 mm package.
Jan 16, 2024 -
RZ/G3S: Tell me about the power supply modes of the RZ/G3S
The RZ/G3S each consist of three independent power domains. The power consumed by the SOC state can be significantly reduced by turning power domains off. ALL_ON mode: All power domains are in the power-on state. AWO mode: The MPU domain is in the power-off state ...
Jan 16, 2024
Videos & Training
An overview of the RZ/G3S Arm® 64-bit low-power MPUs, designed to extend battery life in IoT gateway devices.
Related Resources