Overview
Description
The RZ/G1H is Renesas' top-class performance device for general-purpose applications. It is equipped with a quad-core Cortex®-A15 (1.4GHz) and Cortex®-A7 (780MHz) CPU, a DDR interface with two channels of 32-bit DDR3 bus, a 3D graphics engine (PowerVR G6400) as a dedicated hardware engine, and two dedicated channels of hardware supporting encoding and decoding of full high-definition video. This high-spec processor is also equipped with high-speed USB 3.0, PCI Express, and SATA interfaces and other comprehensive peripheral functions. The high performance of the RZ/G1H allows it to carry out image processing that requires high processing capabilities, such as image recognition and authentication, and multiple video processing.
Features
- CPU: Cortex-A15＋
Cortex-A7 core, Max. 1.4GHz - Package: 831-pin FBGA
- Memory: SRAM Max. 332KB
- Timer: 32-bit Timer (ch) x 12, 16-bit Timer (ch) x 4, Watchdog Timer (ch) x 1, Compare match Timer x 10
- PWM: PWM Output x 7
- Analog function
- Others: PLL, Power-On Reset
Comparison
Applications
Design & Development
Software & Tools
Boards & Kits
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Support Communities
-
[RZ/G1H] Noise ocuurs in video with gst-launch-1.0
I'm trying to scale and display multiple videos on RZ/G1H(iWave RZ/G1H-PF development kit + version 4.4-CIP Verified Linux Package). But,sometimes the bottom of the HDMI output video blinks black. I attached the image. [Command] #gst-launch-1.0 -ev videotestsrc ...
Nov 8, 2019 -
computer vision support for RZ/G1H MPU platforms
I have a few questions regarding the RZ/G1H MPU such as on the iWave q7 SoM with RZ Linux: These questions are specific for the RZ/G1H MPU running RZ Linux 1.) Does the RZ/G1H support the Uncanny DLL middleware for object recognition ? 2.) If ...
Feb 23, 2018 -
Failed to build SDK for RZ/G1N board
Hello Everyone, We are following the Steps mentioned in document “RZ/G Verified Linux Package Start-Up Guide” for building BSP & SDK for RZ/G1N board. We’re able to build BSP successfully, while building SDK following error is encountered. To build SDK following command is entered ...
Jul 6, 2019
FAQs
-
RZ/G1 : Is HDMI-Tx PHY built in?
HDMI-Tx PHY is not built in. If HDMI-Tx PHY is required, please connect it externally.
Dec 2, 2015 -
RZ/G1 : When connecting with DDR memory, is it possible to swap data pins within the same byte lane as follows?
It is OK to pin swap within the same byte lane. If swapping will allow for cleaner wiring on the PCB design, please swap and wire as needed. However, pins cannot be swapped between two different byte lanes. Swapping between different byte lanes would cause the data/clock timing ...
Dec 2, 2015 -
RZ/G1 : Is the JPEG codec (hard IP) built in?
The JPEG codec (hard IP) is not built in.
Dec 2, 2015