Skip to main content

Overview

Description

The Renesas RA8D1 MCU group features the industry’s first 32-bit graphics-enabled microcontrollers (MCUs) based on the Arm® Cortex®-M85 (CM85) core, delivering breakthrough performance of over 3000 CoreMark points at 480MHz and superior graphics capabilities that enable high resolutions display and Vision AI applications. These are general-purpose MCU devices and address diverse high-performance and compute-intensive applications in Industrial Automation, Home Appliances, Smart Home, Consumer, Building/Home Automation, and Medical/Healthcare market segments.

The RA8D1 MCUs integrate the high-performance CM85 core with large memory, and a rich peripheral set including a high-resolution TFT-LCD controller with parallel RGB and MIPI-DSI interfaces, 2D drawing engine, 16-bit camera interface, and multiple external memory interfaces, optimized to address the needs of diverse graphics and Vision AI applications. These MCUs are available in 176 and 224-pin packages. Secure Element-like functionality is built-in with advanced cryptographic Security IP, immutable storage, a true secure boot, and tamper protection, for truly secure IoT.

The RA8D1 MCUs are fully supported by the Flexible Software Package and a comprehensive set of hardware and software development tools.

Features

  • 480MHz Arm® Cortex®-M85 with Helium™ MVE
  • 1MB - 2MB Flash memory and 1MB of SRAM including TCM
  • 32KB I/D Caches and 12KB Data Flash
  • Graphics LCD Controller with RGB and MIPI-DSI I/Fs
  • 2D Drawing Engine, 16-bit CEU Camera I/F
  • 32/16/8-bit external memory interfaces (CS/SDRAM)
  • ARMv8-M TrustZone® Security
  • Renesas Security IP (RSIP-E51A)
  • On-chip immutable ROM for First Stage Bootloader
  • xSPI compliant Octal SPI with XIP & DOTF
  • USB 2.0 HS and FS
  • 2ch of CAN-FD
  • Ethernet controller with DMA
  • 32-bit & 16-bit Timers, 32-bit Ultra-Low-Power Timer
  • 12-bit ADC and 12-bit DAC
  • High-Speed Analog Comparators
  • SCI (UART, Simple SPI, Simple I2C), SDHI, SSI
  • SPI/ I2C/I3C multi-master interface
  • Scalable from 176-pin to 224-pin packages

Comparison

Applications

Documentation

Design & Development

Software & Tools

Sample Code

Boards & Kits

Models

ECAD Models

Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.

Diagram of ECAD Models

Models

Type Title Date
Model - IBIS ZIP 5.02 MB
Model - BSDL Log in to Download ZIP 45 KB
2 items

Product Options

Applied Filters:

Support

Support Communities

Support Communities

Get quick technical support online from Renesas Engineering Community technical staff.
Browse FAQs

FAQs

Browse our knowledge base of common questions and answers.
Submit a Ticket

Submit a Ticket

Need to ask a technical question or share confidential information?
Renesas Academy

Renesas Academy

Comprehensive on-demand training for Renesas products at your fingertips.

Support Communities

  1. Ethernet Issue In RA8D1

    I am trying to run the code AWS_HTTPS_CLIENT but i am facing the issue of the  provision_alt_key can you help me to solve this issue I have attached the output with this post kindly refer itOutput: Ethernet adapter for Renesas EK-RA6M3:Description : Renesas EK-RA6M3 ...

    Nov 26, 2024
  2. EK-RA8D1 : OSPI FLASH Stack configuration

    Hi      Is there any document available  that explaining each of the items in the property table of r_ospi_b stack. Best Regards Ranjith

    Feb 20, 2025
  3. SDRAM pin setup for RA8D1

    One of my clients is designing a temperature controller project about RA8D1. At present, in the hardware design stage, we find that both SDRAM A00 and DQM1 of RA8D1 use P112 pins. After checking Renesas' DEMO, we find that A01-A13 pins are used, but no special treatment is found ...

    Nov 5, 2024
View All Results from Support Communities (151)

FAQs

  1. RA and FSP Curriculum : Getting Started with EK-RA8D1 Graphics Application Embedded Wizard

    Last Updated: 30 Oct 2024 This lab material explains all necessary steps to create an Embedded Wizard UI application suitable for RA8D1 Evaluation Kit.   Getting Started with EK-RA8D1 Graphics Application Embedded Wizard for FSP 5.5.0 - a hands on lab using EK-RA8D1, Embedded Wizard Studio and FSP ...

    Oct 30, 2024
  2. RA8D1: Display Interfaces

    RA8D1 Group MCUs support the MIPI-DSI interface, in addition to the parallel RGB interface. This low pin count interface is based on the MIPI D-PHY Specification Version 2.1, defined by the MIPI Alliance and supports connection to  MIPI compliant displays. The RA8D1 supports 2-lane MIPI-DSI ...

    Dec 12, 2023
  3. RA8D1: Graphics/HMI support

    RA8D1 devices include a high resolution Graphics LCD Controller that can support resolutions up to WXGA (1280x800) and a 2D Graphics Drawing Engine that offloads graphics rendering function from the CPU, and supports multiple graphics primitives and formats and image functions such as rotation, scaling, alpha blending etc.. Depending on ...

    Dec 12, 2023
View All Results from FAQs (43)

Videos & Training

Watch an unboxing and overview of the RA8 series evaluation kits, including several example projects. The RA8 series kits can help you quickly develop proofs of concept for resource-constrained AIoT edge and endpoint devices.