Features
- Single supply: 1.8V to 5.5V
- Two-wire serial interface (I²C serial bus)
- Clock frequency: 400kHz
- Power dissipation: Standby: 2.0μA (max) Active (Read): 1.0mA (max) Active (Write): 3.0mA (max)
- Automatic page write: 16-byte/page
- Write cycle time: 5ms
- Endurance: 1,000k or more Cycles at 25°C
- Data retention: 100 or more Years at 25°C
- Small size packages: SOP 8-pin, TSSOP 8-pin
- Shipping tape and reel TSSOP 8-pin: 3,000 IC/reel SOP 8-pin: 2,500 IC/reel
- Temperature range: −40°C to +85°C
- Lead-free products. (#U0, #S0)
- Halogen-free products. (#U0)
Description
The R1EX24xxx series are two-wire serial interface EEPROM (Electrically Erasable and Programmable ROM). They realize high-speed, low-power consumption, and a high level of reliability by employing advanced MONOS memory technology and the CMOS process, and low-voltage circuitry technology. They also have a 16-byte page programming function to make their write operation faster.
Renesas Boards & Kits
RZ/N2L Industrial Network SoM Kit
YCONNECT-IT-RZN2L is a compact development kit for evaluating applications using Industrial Ethernet communication with the RZ/N2L MPU. It contains two pre-assembled boards called "Stamp Module" and "Carrier Board".
The kit provides EtherCAT, EtherNet/IP and Modbus sample software. With the... Read More
Test This Board Remotely
CPU Card with RDC-IC for RX72M MCU Group
This product is a CPU card for motor control with RX72M. It can control BLDC motors and stepping motors when used in combination with the corresponding inverter board.
Supported inverter boards (kits)
- Evaluation System for BLDC Motor (P/N: RTK0EMX270S00020BJ)
- Evaluation System for... Read More
RZ/N2L Remote I/O Solution Kit
The RZ/N2L Remote I/O Solution Kit is a development kit for evaluating remote I/O applications using the RZ/N2L Gateway Solution Board which is equipped with digital IO interface with photocoupler isolation and analog input and supports industrial network communications such as EtherCAT and... Read More
Support Communities
-
linux EEPROM probe failure
Hello, I'm using an EEPROM 24AA128 (16Kbytes & 64 bytes/page) 7-bit address is 0x51 I'm getting an error at startup Here's my bootlog : i2c /dev entries driveri2c-riic i2c-riic.0: version 2013-04-19: 100[kbps]i2c-riic i2c-riic.2: version ...
Oct 10, 2017 -
RX71ML - .abs file error
Hi, I am new user for RX71ML Product.I have to done fully code for Flash and PDC programming in E2studio 3.0 tool, v2.03 tool chain also v3.01 BSP. But when i had to build my program then make file error display like below: " makefile:118: recipe ...
Dec 9, 2015
Support Communities
