Features
- Input/output voltage range: 5V to 55V, withstands 60V transients
- Supports synchronous or standard boost topology
- Peak current mode control with adjustable slope compensation
- Secondary average current control loop
- Integrated 5V 2A sourcing/3A sinking N-channel MOSFET drivers
- Switching frequency: 50kHz to 1.1MHz per phase
- External synchronization
- Programmable minimum duty cycle
- Programmable adaptive dead time control
- Optional diode emulation and phase dropping
- PWM and analog track function
- Forced PWM operation with negative current limiting and protection
- Comprehensive fault protections
- Selectable hiccup or latch-off fault response
- AEC-Q100 qualified, Grade 1: -40°C to +125°C
- 5mmx5mm 32 Ld Wettable Flank QFN (WFQFN) package
Description
The ISL78227 is an automotive grade (AEC-Q100 Grade 1), 2-phase, 55V synchronous boost controller that simplifies the design of high power boost applications. It integrates strong half-bridge drivers, an analog/digital tracking input, and comprehensive protection functions. The ISL78227 enables a simple, modular design for systems requiring power and thermal scalability. It offers peak-current mode control for fast line response and simple compensation. Its synchronous 2-phase architecture enables it to support higher current while reducing the size of input and output capacitors. The integrated drivers feature programmable adaptive dead time control offering flexibility in power stage design. The ISL78227 offers a 90° output clock and supports 1-, 2-, and 4-phases. The ISL78227 offers a highly robust solution for the most demanding environments. Its unique soft-start control prevents large negative current even in extreme cases, such as a restart under high output prebias on high volume capacitances. It also offers two levels of cycle-by-cycle overcurrent protection, average current limiting, input OVP, output UVP/OVP, and internal OTP. In the event of a fault, the fault protection response can be selected to be latch-off or hiccup recovery. Also integrated are several functions that ease system design. A unique tracking input controls the output voltage, allowing it to track either a digital duty cycle (PWM) signal or an analog reference. The ISL78227 provides input average current limiting so the system can deliver transient bursts of high load current while limiting the average current to avoid overheating.
Parameters
| Attributes | Value |
|---|---|
| Outputs (Max) (#) | 1 |
| Phases (Max) | 2 |
| Output Voltage (Min) (V) | 5 |
| Bias Voltage Range (V) | 4.75 - 5.5 |
| Integrated MOSFET Driver (s) | Yes |
| Input Voltage (Min) (V) | 5.6 |
| Input Voltage (Max) (V) | 55 |
| Parametric Applications | Automotive power system (e.g., 12V to 24V, 12V to 48V, etc.), Trunk audio amplifier, Start-stop system, Automotive boost applications, Industrial and telecommunication power supplies |
| Qualification Level | Automotive |
| Simulation Model Available | iSim |
Package Options
| Pkg. Type | Pkg. Dimensions (mm) | Lead Count (#) | Pitch (mm) |
|---|---|---|---|
| WFQFN | 5.0 x 5.0 x 0.85 | 32 | 0.5 |
Renesas Boards & Kits
2-Phase Boost Controller Evaluation Board
The ISL78227 is an automotive grade (AEC-Q100 Grade 1), 2-phase, 55V synchronous boost controller that simplifies the design of high power boost applications. This device enables simple, modular design for systems requiring power and thermal scalability, and offer highly robust solutions for the... Read More
Support Communities
-
ISL81601
How do you set the slope of the slope compensation circuit in the ISL81601?
Dec 9, 2024
Knowledge Base
-
If the ISL78227 experiences an Input OV condition and HICCUP mode is selected, will the output voltage be discharged during the hiccup restart?
Question: If the ISL78227 experiences an Input OV condition and HICCUP mode is selected, will the output voltage be discharged during the hiccup restart? Answer: In this case, the responses are different for CCM mode and DE mode. 1. If the part is set in CCM mode, the scenario is ...
-
Can the ISL78227 be used for 12V to 48V battery charging system?
Question: Can the ISL78227 be used for 12V to 48V battery charging system? Answer: Yes. This part supports voltage up to 55V switching, so it can support output voltage set to 48V.
-
When using the ISL78227, can I use Phase Dropping Mode in Forced CCM Mode?
Question: Can I use Phase Dropping Mode in Forced CCM Mode? Answer: Phase dropping is not available in CCM mode (DE/PHDRP is tied to logic low). The DE/PHDRP pin allows for the selection of Phase Dropping and Diode Emulation (if DE/PHDRP is floating) and ...
Support Communities
