Features
- Rail-to-rail inputs and outputs
- CMRR at VCM = 0.1V beyond VS: 135dB, typ
- VOH and VOL: 10mV from VS, typ
- No 1/f noise corner down to 0.1Hz
- Input noise voltage: 10 nV/√Hz at 1kHz
- 0.1Hz to 10Hz noise voltage: 250nVP-P
- Low offset voltage: 2.5µV, Max
- Superb offset drift: 15nV/°C, Max
- Single supply: 2.25V to 6.0V
- Dual supply: ±1.125V to ±3.0V
- Low ICC: 675µA, typ
- Wide bandwidth: 3.5MHz
- Operating temperature range
- Industrial: -40°C to +85°C
- Full industrial: -40°C to +125°C
- Packaging
- Single: SOIC, SOT-23
Description
The ISL28134 is a single, chopper-stabilized zero drift operational amplifier optimized for single and dual supply operation from 2. 25V to 6. 0V and ±1. 125V and ±3. 0V. The ISL28134 uses auto-correction circuitry to provide very low input offset voltage, drift and a reduction of the 1/f noise corner below 0. 1Hz. The ISL28134 achieves ultra low offset voltage, offset temperature drift, wide gain bandwidth and rail-to-rail input/output swing while minimizing power consumption. The ISL28134 is ideal for amplifying the sensor signals of analog front-ends that include pressure, temperature, medical, strain gauge and inertial sensors down to the µV levels. The ISL28134 can be used over standard amplifiers with high stability over the industrial temperature range of -40°C to +85°C and the full industrial temperature range of -40°C to +125°C. The ISL28134 is available in an industry standard pinout SOIC and SOT-23 packages.
Parameters
| Attributes | Value |
|---|---|
| Channels (#) | 1 |
| Temp. Range (°C) | -40 to +85°C, -40 to +125°C |
| Bandwidth (MHz) | 3.5 |
| IBIAS (nA) | 0.12 |
| IS per Amp (mA) | 0.675 |
| Offset Voltage (Max) (mV) | 0.0025 |
| Slew Rate (V/µs) | 1.5 |
| Rail-to-Rail Input | Yes |
| Rail-to-Rail Output | Yes |
| Single Supply Voltage Range (V) | - |
| Gain Min | 1 |
| IOUT (A) | 0.065 |
| Noise VN (nV/√Hz) | 8 |
| AVOL (dB) | 125 |
| CMRR (dB) | 135 |
| PSRR (db) | 135 |
| Enable | No |
| Topology [Rail 1] | VFA |
| VS (Min) (V) | 2.25 |
| VS (Max) (V) | 6 |
| Thermal Shutdown | No |
| Simulation Model Available | iSim |
Application Block Diagrams
|
Turntable System
This turntable system features a low-power MCU and RIAA preamp for precise motor and audio control.
|
|
Photovoltaic (PV) Arc Detection System
Real-time PV arc detection system minimizes fire risks with fast, accurate fault identification.
|
|
Embedded Programmable Logic Controller (PLC) for Industrial Use
Flexible embedded programmable logic controller (PLC) designed to integrate any type of interface for end-application needs.
|
|
Mass Flow Controller with EtherCAT & CAN Connectivity
MFCs enable mass and flow rate measurements and can be used for gas control in semiconductor manufacturing equipment.
|
|
Industrial Electronic Valve Control
Industrial electronic valve to offer precise, SIL2-compliant control.
|
|
Smart Grid Fault Indicator Unit
Low-power smart grid fault indicator with high-performance MCUs and efficient monitoring.
|
Additional Applications
- Medical instrumentation
- Sensor gain amps
- Precision low drift, low frequency ADC drivers
- Precision voltage reference buffers
- Thermopile, thermocouple, and other temperature sensors
- front-end amplifiers
- Inertial sensors
- Process control systems
- Weight scales and strain gauge sensors