Overview
Description
The IPS2200 is an industrial-qualified, inductive position sensor IC capable of providing the absolute rotor position as sine and cosine. This IC uses the physical principle of Eddy currents to detect the position of a simple metallic target moving above a set of coils, consisting of one transmitter and two receivers. The output interface can be configured as single-ended, for higher system cost effectiveness or differential to better reject common mode disturbers. The IPS2200 can be used for high-speed motor commutation up to 250krpm electrical, in industrial, medical, robotic, and consumer applications.
Stray filed immunity, lower weight, smaller size, and a substantial BOM optimization make the IPS2200 the key element of the Resolver 4.0, a disruptive solution.
Features
- Interface: sin/cos single-ended or differential
- Qualified for Industrial market
- Temperature range: -40 °C to 125 °C ambient
- Voltage Supply: 3.3V ±10% or 5.0V ±10%
- Rotational Speed: up to 250.000 rpm (electrical)
- Propagation delay: programmable; < 10µs
- Sin/Cos gain mismatch and offset compensation
- Overvoltage, reverse polarity, short-circuit protected
- Digital programming interface: I²C or SPI
- AB incremental pulse outputs
- 16-TSSOP package
Comparison
Applications
Design & Development
Software & Tools
Boards & Kits
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Support Communities
-
IPS2200 sample code
Dear, Could you let me get a sample code working on Renesas MCU? If you have, I want to get it for RA & RX MCU. Thank you.
Jan 27, 2023 -
IPS2200 Cyber security Reset Problem.
Hello. When using IPS2200, if I2C Write is prohibited, is there a way to reset it? If Cyber Security is activated (Bit 6 of Register 0x01/ 0x21 System Configuration 2), Register Write is no longer possible, making it difficult to use the chip. If Cyber Security is activated, is ...
Nov 29, 2024 -
IPS2200 I2C communication issues. No ACK after address byte when reading.
Hello, I am testing the IPS2200 for absolute position sensing applications. I made a prototype board and the sensor seem to work fine. I can get good sin/cos analog signals at the output while rotating a metal target. Now I am trying to communicate with this sensor over ...
Apr 4, 2024