Overview
Design & Development
Software & Tools
Sample Code
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Support Communities
-
What is the correct procedure to flash h8/3062 soldered on a board?
Hi guys, I've an h8/3062 soldered on a board, what is the correct procedure to set the FWE, MD0, MD1, MD2 pins to boot mode, without damage the MCU?? I would read and reflash the firmware by SCI1 connected directly in PC's serial port! thanks
Jul 26, 2010 -
H8/3062 connecting to e8a
Welcome. I have a problem with connecting the appropriate pins h8 / 3062 to h8a. the manufacturer of the device made a flash socket. I don't know where around FWE and MD2.
Nov 24, 2020
FAQs
-
Can we transfer first MSB to LSB to register smart card interface?
Yes, it will. The LSB/MSB-first function of smart card interface is directly usable in the serial interface. *Note: H8/300H only.
Mar 31, 2009 -
How to fix 1 bit misalignment using synchronous mode and clock SCI?
The serial interface of the H8 family and the H8S family is divided into a transmit part and a receive part structurally to be used for both asynchronous and functions. The transmit part and the receive part can be operated individually. When in synchronous transmit/receive data, each part ...
Mar 31, 2009 -
How to properly set up A/D converter?
Depending on the operating frequency and the setting value that you are using, it can be possible to setup the conversion time, which is lower than the minimum conversion time of electrical characteristics, but in that case, accurate conversion result will not be guaranteed. All the A/D converters ...
Mar 31, 2009