Features
- Extremely low skew outputs (50 ps maximum)
- Packaged in 8-pin SOIC
- Available in Pb (lead) free package
- Low power CMOS technology
- Operating voltages of 2.5 V to 5 V
- Output Enable pin tri-states outputs
- 5 V tolerant input clock
- Industrial temperature range
Description
The 524 is a low skew, single input to four output, clock buffer. Part of Renesas' ClockBlocks™ family, this is our lowest skew, small clock buffer. See the 552-02 for a 1 to 8 low skew buffer. For more than eight outputs, see the MK74CBxxx Buffalo™ series of clock drivers. Renesas makes many non-PLL and PLL based low skew output devices as well as Zero Delay Buffers to synchronize clocks. Contact us for all of your clocking needs.
Parameters
| Attributes | Value |
|---|---|
| Temp. Range (°C) | -40 to 85°C |
| Product Category | Clock Buffers & Drivers |
Package Options
| Pkg. Type | Pkg. Dimensions (mm) | Lead Count (#) | Pitch (mm) |
|---|---|---|---|
| SOIC | 4.9 x 3.9 x 1.5 | 8 | 1.27 |
Support Communities
-
uPD720202K8-711-BAA power state question
We connected a Sierra USB WWAN module EM7590 to uPD720202K8-711 in our project. The EM7590 need to enable the “USB selective suspend” and “remote wake up“ from USB controller . The USB WWAN module is support D0 and D2. Is it possible to ask the Renesas software team which power ...
Jan 9, 2025 -
DA14592 - Setting up QSPI on the Daughterboard
Hello, I am struggling to get the QSPI chip working on my DA14592 daughterboard. I have soldered the Macronix MX25U3235FZNI into place and I am now trying to modify my code so that I can store data on the chip. So far I have done the following 1) Added a ...
Jan 8, 2025 -
Maximum frequency for MTCLKA of RX630
I am using an RX630 with a 16Mhz clock, 192Mhz PLL clock, 96Mhz system clock and 48Mhz peripheral clock. I would like to feed a 16.384Mhz clock into MTCLKA and use the MTU to derive slower clocks from it. Is 16.384Mhz frequency too high to be used as ...
Mar 2, 2015
Knowledge Base
-
NetX Duo TLS Session Module Guide Resources
... Secure,” which implements the Secure Socket Layer (SSL) and its replacement Transport Layer Security (TLS) protocol as described in RFCs 2246 (version 1.0), and 5246 (version 1.2). NetX Duo Secure also includes routines for basic X.509 (RFC 5280). NetX Duo Secure is intended for applications using the ...
Support Communities
