Features
- Extremely low skew outputs (50 ps maximum)
- Packaged in 8-pin SOIC
- Available in Pb (lead) free package
- Low power CMOS technology
- Operating voltages of 2.5 V to 5 V
- Output Enable pin tri-states outputs
- 5 V tolerant input clock
- Industrial temperature range
Description
The 524 is a low skew, single input to four output, clock buffer. Part of Renesas' ClockBlocks™ family, this is our lowest skew, small clock buffer. See the 552-02 for a 1 to 8 low skew buffer. For more than eight outputs, see the MK74CBxxx Buffalo™ series of clock drivers. Renesas makes many non-PLL and PLL based low skew output devices as well as Zero Delay Buffers to synchronize clocks. Contact us for all of your clocking needs.
Parameters
| Attributes | Value |
|---|---|
| Temp. Range (°C) | -40 to 85°C |
| Product Category | Clock Buffers & Drivers |
Package Options
| Pkg. Type | Pkg. Dimensions (mm) | Lead Count (#) | Pitch (mm) |
|---|---|---|---|
| SOIC | 4.9 x 3.9 x 1.5 | 8 | 1.27 |
Support Communities
-
Regarding error in debugger with upd70F3376
Hi All, I am using the upd70F3376 controller and using the debugger ID850-QB.If i am going to load the file, facing the error,write oto the on-chip debug reserved area is prohibited.(address :0x0270). Please can you share your solutions ASAP. thanks in advance.
Mar 4, 2015 -
Existing Firmware for EV Charger
Hello! Can I ask if there are any existing projects for EV charger specifically on the firmware side? Thanks! This thread was automatically locked due to age.
Jan 7, 2025 -
UPD720201 compatibility issue.
We have a compatibility issue regarding to USB controller IC UPD720201K8. We did hot-plug test and it will stop responding / detecting. Could you provide some advice. OS: Ubuntu 22.04.5 Reproduce step: 1. Powe off/on the SUT2. Boot into OS3. Plugin USB hub(ORICO model ...
Jan 7, 2025
Knowledge Base
-
NetX Duo TLS Session Module Guide Resources
... Secure,” which implements the Secure Socket Layer (SSL) and its replacement Transport Layer Security (TLS) protocol as described in RFCs 2246 (version 1.0), and 5246 (version 1.2). NetX Duo Secure also includes routines for basic X.509 (RFC 5280). NetX Duo Secure is intended for applications using the ...
-
How to set address multiplex connecting with 32-bit bus width SDRAM?
When connecting it with 32-bit bus width SDRAM, please set for the address multiplex bit (AMX[3:0]) of SH7709S/SH7729R/SH7706/SH7727 as follows. Specification of SDRAM Address multiplex setting value (AMX) Remarks Capacitance Configuration 64Mbit 524,288 words x 32 bits x4 banks Specified ...
Mar 24, 2009 -
How to set address multiplex when connecting 32-bit bus width SDRAM?
When connecting it with 32-bit bus width SDRAM, please set for the row address bit (a2/3ROW[1:0]) and column address bit(A2/3COL[1:0]) of SH7705/SH7720 as follows. Specification of SDRAM Address multiplex setting value (AMX) Remarks Capacitance Configuration 64Mbit 524,288 ...
Mar 24, 2009
Support Communities
