Features
- Lead-free packaging (Pb-free)
- Low jitter (typical 27 ps short term jitter)
- Wide input frequency range
- 8 kHz to 100 MHz
- LVCMOS single-ended clock outputs
- Up to 110 MHz
- Uses 3.3 V power supply
- 5 Volt tolerant Inputs (HSYNC, VSYNC)
- Coast (ignore HSYNC) capability via VSYNC pin
- Industry standard I2C-bus programming interface
- PLL Lock detection via I2C or LOCK output pin
- 16-pin TSSOP package
Description
The 1526 is a low-cost, high-performance frequency generator. It is suited to general purpose phase controlled clock synthesis as well as line-locked and genlocked high-resolution video applications. Using IDT's advanced low-voltage CMOS mixed-mode technology, the 1526 is an effective clock synthesizer that supports video projectors and displays at resolutions from VGA to beyond XGA. The 1526 offers single-ended clock outputs to 110 MHz. The HSYNC_out, and VSYNC_out pins provide the regenerated versions of the HSYNC and VSYNC inputs synchronous to the CLK output. The advanced PLL uses its internal programmable feedback divider. The device is programmed by a standard I2C-bus™ serial interface and is available in a TSSOP16 package.
Support Communities
-
Can't get timer to work
Can't get timer to work
Mar 11, 2009 -
"Multiple problems have occurred" Dialog
When I am debugging and building my project, e2studio slows down the build process (anywhere from 5 to 10 minutes) and then a dialog box is shown: I then need to restart e2studio, and start over. This has occurred 3 times within the last 2 hours. The latest entries from ...
Oct 22, 2019 -
RA and Synergy are the same chip?
Hello All, Datasheets of "Renesas RA2A1 Group" and "S1JA Microcontroller Group" look the same.Does the product name change due to the difference in software licensing fees only? Thank you, This thread was automatically locked due to age.
Oct 19, 2019
Support Communities
