Overview
Description
The SLG46811 programmable mixed-signal matrix IC offers an I2C serial communications bus and a multichannel sampling analog comparator, making it the smallest GreenPAK that can sample up to four analog channels.
The SLG46811 offers digital macrocells, including shift registers and a long pattern generator block, that enable the device to generate master transactions for SPI, I2C, UART, and 1-wire. Also, a small size and energy efficiency make the device ideal for a wide range of applications.
Features
- Read Back Protection (Read Lock)
- Power Supply: 2.5V (±8%) to 5V (±10%)
- Operating Temperature Range: -40°C to 85°C
- RoHS-Compliant/Halogen-Free
- Macrocells Overview
- Multichannel Sampling Analog Comparator (MS ACMP)
- Sampling up to Four Analog Channels
- Selectable Voltage Reference for Each Channel
- Different Sampling Scenarios
- Synchronous or Asynchronous Result Appearance
- Integrated Voltage Reference
- Twelve Combination Function Macrocells
- Two 2-Bit LUTs or (DFF/LATCH) Macrocells
- One Selectable Programmable Pattern Generator or 2-bit LUT
- Four 3-Bit LUTs or (DFF/LATCH) with Set/Reset
- Four Selectable DFF/LATCH or 3-bit LUTs or Shift Registers
- One 4-Bit LUT or (DFF/LATCH) with Set/Reset Macrocell
- Six Multi-Function Macrocells
- Five Selectable DFF/Latch or 3-bit LUTs + 8-bit Delay/Counters
- One Selectable DFF/Latch or 3-bit LUT + 8-bit Delay/Counter/FSM
- Extended Pattern Generator
- Up to 8 Parallel Outputs
- 92 Bytes Pattern Stored in the Non-Volatile Memory (NVM)
- I²C Communication
- Programmable Delay with Edge Detector Output
- Deglitch Filter or Edge Detector
- Two Oscillators (OSC)
- 2.048/10kHz Oscillator
- 25MHz Oscillator
- Analog Temperature Sensor
- Power-On Reset (POR) with CRC
- Multichannel Sampling Analog Comparator (MS ACMP)
Comparison
Applications
Documentation
Featured Documentation
Log in required to subscribe
|
|
|
|
|---|---|---|
| Type | Title | Date |
| Datasheet | PDF 2.32 MB | |
| Application Note | PDF 634 KB | |
| Application Note | PDF 790 KB | |
| Application Note | PDF 558 KB | |
| Application Note | PDF 441 KB | |
| Application Note | PDF 424 KB | |
| Application Note | PDF 621 KB | |
| Application Note | PDF 876 KB | |
| Device Errata | PDF 198 KB | |
9 items
|
||
Design & Development
Software & Tools
Software & Tools
| Software title
|
Software type
|
Company
|
|---|---|---|
| Go Configure Software Hub Go Configure Software Hub provides development support for a variety of products, including GreenPAK configurable mixed signal matrix and ForgeFPGA™ devices.
|
Software Package | Renesas |
1 item
|
||
Boards & Kits
Development
SLG46811V-SKT
Active
GreenPAK SLG46811 Development Kit with Socket Adapter
The SLG46811V-SKT includes the SLG4SA12-16x16 socket adapter and 50 SLG46811V samples.
Recommended Documents:
Development
SLG46811V-DIP
Active
GreenPAK SLG46811 20-Pin DIP Prototyping Board
The SLG46811V-DIP 20-pin DIP prototyping board is perfect for breadboarding and fast prototypes. It requires the DIP Adapter (SLG4SA-DIP) to use it with the Advanced Development Board.
Recommended Documents:
Development
SLG4DVKADV
Active
GreenPAK Advanced Development Board
The GreenPAK Advanced Development Board provides full programming, emulation, and testing functions for the GreenPAK devices - for use with SLG46xxxX-SKT / SLG47xxxV-SKT socket kits.
It works in tandem with the GreenPAK Designer software (built into Go Configure™ Software Hub), and it allows...
Recommended Documents:
Test This Board Remotely
Available on Lab on the Cloud, use our PC-based GUI to instantly start configuring and testing designs in our virtual lab, no physical board needed.
Development
SLG4SA-DIP
Active
GreenPAK DIP Adapter for GreenPAK Advanced Development Board
The GreenPAK™ DIP Adapter for the GreenPAK Advanced Development Board allows for using the SLG46xxxV-DIP and SLG47xxxV-DIP prototyping boards with the GreenPAK Advanced Development Board. It acts as the bridge between the advanced and DIP development platforms.
Recommended Documents:
Development
SLG4DVKGSD
Active
GreenPAK Serial Debugger Board (GSD)
GreenPAK Serial Debugger (GSD) device can be used for programming GreenPAK products with multiple-time Non-Volatile Memory (NVM) or for configuring the interconnect logic, the IOs, and the macrocells of all GreenPAK chips with I²C interface. It is very helpful in the late stages of development...
Recommended Documents:
Development
SLG4DVKLITE
Active
GreenPAK Lite Development Board
The GreenPAK Lite Development Board provides full programming, emulation, and testing functions for GreenPAK devices, working in a pair with the Go Configure™ Software Hub. Board functionality is provided by the RX66T MCU from Renesas.
Recommended Documents:
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Product Options
Applied Filters:
Videos & Training
GreenPAK Configurable Mixed-signal IC Introduction
Video List
