Overview
Design & Development
Software & Tools
Sample Code
Boards & Kits
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Resources
Support Communities
-
LUA port to M16C/62P
LUA port to M16C/62P
Jan 1, 1970 -
Re: Interfacing 4x4 keypad and 16x2 LCD screen with M16C/62P
Hi everyone,This is my second post :-)Last week, I needed help with interfacing my M16C/62P with a 16x2 LCD screen and thankfully I've managed to do so after some help and guidance.. However, I want to add a 4x4 keypad to my project. The good thing ...
Aug 19, 2010 -
Interfacing a 16x2 LCD screen with M16C/62P: Help is needed
Hi everyone,For the last couple of days, i've been trying to interface my M16C/62P with a 16x2 LCD screen and i can't get it working. I've tried and tried so many codes :-(I've tried the code below most of the time but i ...
Aug 4, 2010
FAQs
-
(M16C,M32C) Are there any hardware precautions for accurate A/D conversion?
... low enough. (Refer to the hardware manual for the calculation method.) Moreover, in order to suppress the influence of the input current at the time of A/D conversion, please add a capacitor to the analog input pin. Example (M16C/62P) [ About the R8C Family products, click here.]
Feb 27, 2012 -
(M16C Family products other than the M32C/80 Series, and the M16C/80 Series) Priority level is "0" + Request bit is "1": Priority level to "7"?
The interrupt will be accepted. Then, the interrupt request bit will be cleared. However, if you use the MOV instruction to change the interrupt priority level, the interrupt request bit may be cleared to "0". The interrupt will not be accepted when the interrupt request bit is cleared at this ...
Feb 14, 2006 -
(M32C/80 Series, M16C/80 Series) Priority level is "0" + Request bit is "1": Priority level to "7"?
The interrupt will be accepted. Then, the interrupt request bit will be cleared. However, if you use the MOV instruction to change the interrupt priority level, the interrupt request bit may be cleared to "0". The interrupt will not be accepted when the interrupt request bit is cleared at this ...
Feb 28, 2012