Overview
Description
The 72200 is a 256 x 8 SyncFIFO™ with clocked read and write controls. This FIFO is useful for a wide variety of data buffering needs, such as graphics, Local Area Networks (LANs), and interprocessor communication. It has 8-bit input and output ports. The Read Clock can be tied to the Write Clock for single clock operation or the two clocks can run asynchronous of one another for dual clock operation.
Features
- 10 ns read/write cycle time
- Read and Write Clocks can be asynchronous or coincidental
- Dual-Ported zero fall-through time architecture
- Empty and Full flags signal FIFO status
- Almost-Empty and Almost-Full flags set to Empty+7 and Full-7, respectively
- Output enable puts output data bus in high-impedance state
- Available in 28-pin 300 mil plastic DIP
- Industrial temperature range (–40C to +85C) is available
Comparison
Applications
Design & Development
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Support Communities
-
RZV2L HDMI Output Issue in IT6161 MiPi DSI to HDMI Bridge Chip
Hi,I have a custom RZV2L board. where I added IT6161 MiPi DSI to HDMI bridge chip for HDMI Output. I am able to add the IT6161 driver to the RZV2L Kernel. Also, I am getting the HDMI Output in the Monitor. But the Weston desktop HDMI output is not ...
May 20, 2025 -
I can't program SPI flash
Hi, I'm going to program SPI flash of Macronix(MX25V1035F), but I can't. I programed MX25V1035F by SmartSnippets. Memory Burinig is probably successed(Log is below), but Data File Contents and Memory Contents are different.(Attached File) I added SPI flash info at spi_flash.c/spi ...
Dec 12, 2016