パワーマネジメント

概要

The HIP2210 is a 100V, 3A source, 4A sink high-frequency half-bridge NMOS FET driver. The HIP2210 features a tri-level PWM input with programmable dead time. Its wide operating supply range of 6V to 18V and integrated high-side bootstrap diode supports driving the high-side and low-side NMOS in 100V half-bridge applications.

This driver features strong 3A source, 4A sink drivers with very fast 15ns typical propagation delay and 2ns typical delay matching, making it optimal for high-frequency switching applications. VDD and boot UVLO protects against an undervoltage operation.

The tri-level input of the HIP2210 PWM pin controls the high-side and low-side drivers with a single pin. When the PWM input is at logic high, the high-side bridge FET is turned on and the low-side FET is off. When the input is at logic low, the low-side bridge FET is turned on and the high-side FET is turned off. When the input voltage is in the mid-level state, both the high-side and low-side bridge FETs are turned off. The PWM threshold levels are proportional to an external input reference voltage on the VREF pin, allowing PWM operation across a 2.7V to 5.5V logic range.

The HIP2210 is offered in a 10 Ld 4x4mm TDFN package.

HIP2210, HIP2211 Block Diagram
HIP2210, HIP2211 Block Diagram
  • 115VDC bootstrap supply maximum voltage supports 100V on the half-bridge
  • 3A source and 4A sink gate drivers for NMOS FETs
  • Fast propagation delay and matching: 15ns typical delay
  • Integrated 0.5Ω typical bootstrap diode
  • Wide 6V to 18V operating voltage range
  • VDD and boot Undervoltage Lockout (UVLO)
  • Robust noise tolerance: wide hysteresis at inputs; HS pin tolerates up to -10V continuous
  • Tri-Level PWM input with logic threshold levels set by external VREF pin from 2.7V to 5.5V
  • Programmable dead time prevents shoot-through; adjustable from 35ns to 350ns with a single resistor
双方向デジタル・パワー・ソリューション

アプリケーション

  • Telecom half-bridge and full-bridge DC/DC converters
  • 3-phase BLDC motor driver; H-Bridge motor driver
  • Two-switch forward and active clamp converters
  • Multiphase PWM DC/DC controllers
  • Class-D amplifiers

ドキュメント

タイトル 分類 日付
HIP2210, HIP2211 Datasheet
PDF593 KB
データシート
AN1116: CMOS Applications Information
PDF576 KB
アプリケーションノート
HIP2210EVAL1Z Evaluation Board Manual
PDF1.05 MB
マニュアル－開発ツール
How Green is Your Cloud?
PDF295 KB
ホワイトペーパー

設計・開発

ソフトウェア／ツール

iSim:PE Offline Simulation TooliSim Personal Edition (iSim:PE) speeds the design cycle and reduces risk early in any project, identifying parts that can be used in current as well as next-generation designs.ダウンロード:
HIP2210 iSim:PE Model
 Simulator ルネサス

ソフトウェアダウンロード

タイトル 分類 日付
HIP2210, HIP2211 Configuration Calculation Worksheet
XLSX92 KB
ソフトウェア／ツール－その他

ボード＆キット

HIP2210EVAL1Z Half-Bridge Driver Evaluation Board

HIP2210EVAL1Z

Evaluation
ご購入

100V, 3A Source, 4A Sink, High-Frequency Half-Bridge NMOS FET Drivers

The HIP2210EVAL1Z evaluation board is designed to provide a quick and comprehensive method for evaluating the HIP2210 100V, 3A source, 4A sink, high frequency...

主要ドキュメント:
HIP2210EVAL1Z Evaluation Board Manual

ECADモデル

[製品選択]テーブル内の製品名をクリックするとSamacSysが提供する回路図シンボル、PCBフットプリント、3D CADモデルがご確認いただけます。 お探しのシンボルやモデルが見つからない場合、Webサイトから直接リクエストできます。

ECADモデルを調べる

モデル

Title Type Date
HIP2210 iSim:PE Model
SXSCH83 KB
モデル－iSim

製品選択

    Processing table
    型名
    Pkg. Type
    Carrier Type
    MOQ
    ご購入 / サンプル
    HIP2210FRTZ-T
    play_circleActive
    memory
    spa
    view_in_ar
    サンプル入手可能
    		 TDFN Reel 6000 サンプルを入手,
    HIP2210FRTZ
    play_circleActive
    memory
    spa
    view_in_ar
    		TDFN Tube 2250
    Parametric Table tips

    Tips for Using This Parametric Table:

    • Hide Filters button in header: Collapse or expands filters
    • Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
    • Reset button in header: Reset all filters to the page default
    • Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
    • Export button in header: Export the filtered results of the table to an Excel document
    • Filter parts search bar in header: Type to filter table results by part number
    • Hide column button in column headers: Select to hide columns in table
    • AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
    • Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
    • Document icon next to product name in row: View the featured document for this product
    • Chip icon next to the right of the document icon in row: View the block diagram for this product
    • Cart icon to the right of the chip icon: Indicates that samples are available for this product