Overview
Description
The P9221-R3 is a high-efficiency 15W magnetic induction wireless power receiver with in-band, bidirectional data communication with no additional circuitry. The communication channel can be used for proprietary device authentication and secure system data transfer.
The P9221-R3 integrates a 32-bit Arm® Cortex®-M0 processor, low RDS(ON) synchronous rectifier, and ultra-low dropout regulator making it ideal for high-efficiency, space-constrained receiver applications. The device features a programmable output voltage, current limitation, and foreign-object detection (FOD) settings. An I²C serial interface allows reading information such as voltage, current, and fault conditions. The device also features a patented over-voltage protection scheme eliminating the need for additional capacitors, which can minimize the external component count and cost. Combined with the P9242-R3 transmitter, the P9221-R3 forms a complete wireless power system solution for 15W applications with bidirectional communication.
The P9221-R3 is provided in a 52-WLCSP package (2.64mm × 3.94mm, 0.4mm pitch), and it is rated for a 0 °C to +85 °C ambient operating temperature range.
Features
- Supports bidirectional data communication
- Enables authentication and system data transfer
- Single-chip solution supporting applications with up to 15W
- Patented over-voltage protection clamp eliminating external capacitors
- 87% peak DC-to-DC efficiency when combined with the P9242-R3
- Proprietary coil alignment guide
- Programmable output voltage and current limit
- Embedded 32-bit Arm® Cortex®-M0 processor
- Dedicated remote temperature sensing
- Standard device compliant with WPC 1.2 specification
- Supports I²C interface
- 0 °C to +85 °C ambient operating temperature range
- 2.64 x 3.94 mm 52-WLCSP package
Comparison
Applications
Documentation
Featured Documentation
Log in required to subscribe
|
|
|
|
|---|---|---|
| Type | Title | Date |
| Datasheet | PDF 1.54 MB | |
| Application Note | PDF 810 KB | |
| Product Change Notice | PDF 752 KB | |
| Application Note | PDF 3.74 MB | |
| White Paper | PDF 627 KB | |
5 items
|
||
Design & Development
Boards & Kits
Evaluation
WP15WBD-RK
Obsolete
15W Wireless Charging Solution with Bidirectional Data Communication
The WP15WBD-RK evaluation kit demonstrates 15W wireless power transfer and bidirectional data communication between a transmitter (Tx) board with the P9242-R3 wireless power transmitter IC and a receiver (Rx) board with the P9221-R3 wireless power receiver IC. The bidirectional data...
Recommended Documents:
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Product Options
Applied Filters: