Single-Phase R4 Digital Hybrid PWM Controller with PMBus/SMBus/I²C and PFM
Jump to Page Section:
Overview
Description
The ISL68201 is a single-phase, synchronous buck PWM controller featuring Intersil’s proprietary R4™ Technology. It supports a wide 4. 5V to 24V input voltage range and a wide 0. 5V to 5. 5V output range. Integrated LDOs provide controller bias voltage, allowing for single supply operation. The ISL68201 includes a PMBus/SMBus/I2C interface for device configuration and telemetry (VIN, VOUT, IOUT, and temperature) and fault reporting. Intersil’s proprietary R4 control scheme has extremely fast transient performance, accurately regulated frequency control and all internal compensation. An efficiency enhancing PFM mode can be enabled to greatly improve light-load efficiency. The ISL68201’s serial bus allows for easy R4 loop optimization, resulting in fast transient performance over a wide range of applications, including all ceramic output filters. The ISL68201 has four 8-bit configuration pins, which provide very flexible configuration options (frequency, VOUT, R4 gain, etc. ) without the need for built-in NVM memory. This results in a design flow that closely matches traditional analog controllers, while still offering the design flexibility and feature set of a digital PMBus/SMBus/I2C interface. The ISL68201 also features remote voltage sensing and completely eliminates any potential difference between remote and local grounds. This improves regulation and protection accuracy. A precision enable input is available to coordinate the start-up of the ISL68201 with other voltage rails, especially useful for power sequencing.
Features
- Renesas proprietary R4 Technology
- Linear control loop for optimal transient response
- Variable frequency and duty cycle control during load transient for fastest possible response
- Inherent voltage feed-forward for wide range input
- Input voltage range: 4.5V to 24V
- Output voltage range: 0.5V to 5.5V
- ±0.5% DAC accuracy with remote sense
- Support all ceramic solutions
- Integrated LDOs for single input rail solution
- SMBus/PMBus/I2C compatible, up to 1.25MHz
- 256 boot-up voltage levels with a configuration pin
- Eight switching frequency options from 300kHz to 1.5MHz
- PFM operation option, compatible with ISL99140 for improved light-load efficiency
- Start-up into precharged load
- Precision enable input to set higher input UVLO and power sequence as well as fault reset
- Power-good monitor for soft-start and fault detection
- Comprehensive fault protection for high system reliability
- Over-temperature protection
- Output overcurrent and short-circuit protection
- Output overvoltage and undervoltage protection
- Open remote sense protection
- Compatible with 5V or 3.3V PWM input DrMOS or Smart Power Stage (SPS)
- Compatible with Intersil's PowerNavigator software
Documentation
| Document title | Document type
|
Date Date | |
|---|---|---|---|
| PDF 1.68 MB 日本語 | Datasheet | ||
| PDF 509 KB | Application Note | ||
| PDF 397 KB | Application Note | ||
| PDF 4.68 MB | Guide | ||
| PDF 714 KB | Guide | ||
| PDF 393 KB | Guide | ||
| PDF 257 KB | Manual - Development Tools | ||
| PDF 5.52 MB | Manual - Development Tools | ||
| PDF 1.95 MB | Manual - Development Tools | ||
| PDF 1.41 MB | Manual - Development Tools | ||
| PDF 1.69 MB | Manual - Development Tools | ||
| PDF 693 KB | Manual - Hardware | ||
| PDF 194 KB | Other | ||
| PDF 208 KB | Price Increase Notice | ||
| PDF 326 KB | Product Change Notice | ||
| PDF 483 KB | White Paper | ||
16 items
|
|||
Design & Development
Software & Tools
Software & Tools
| Software title
|
Software type
|
Company
|
|---|---|---|
| PowerNavigator Software Renesas' PowerNavigator™ software allows simple configuration and monitoring of multiple Digital-DC devices using a PC with a USB interface.
|
Monitor Debugger/RAM Monitor | Renesas |
| iSim:PE Offline Simulation Tool iSim Personal Edition (iSim:PE) speeds the design cycle and reduces risk early in any project, identifying parts that can be used in current as well as next-generation designs.
|
Simulator | Renesas |
2 items
|
||
Software Downloads
| Software title | Software type
|
Date Date |
|---|---|---|
| ZIP 54.93 MB | Library | |
| ZIP 119.19 MB | Library | |
| ZIP 59.25 MB | Library | |
| ZIP 435 KB | Library | |
| ZIP 1.75 MB | Library | |
| ZIP 166 KB | Library | |
| ZIP 1.75 MB | PCB Design Files | |
| ZIP 120.25 MB | Software & Tools - Other | |
| ZIP 96.49 MB | Software & Tools - Software | |
9 items
|
Boards & Kits
Boards & Kits
Single-Phase R4™ Digital Hybrid PWM Controller and 25A DrMOS Module Demonstration Board
The ISL68201-99125DEMO1Z is a 6-layer board used to demonstrate a compact 13mm x 13mm 16A synchronous buck converter. Transient performance, fault protections, DC/AC...
Featured Documents:
Single-Phase R4™ Digital Hybrid PWM Controller and 35A DrMOS Module Demonstration Board
The ISL68201-99135DEMO1Z is a 6-layer board used to demonstrate a compact 13mm x 13mm 20A synchronous buck converter. Transient performance, fault protections, DC/AC...
Featured Documents:
Hybrid Digital Controller with 40A DrMOS Demonstration Board
The ISL68201-99140DEMO1Z is a 6-layer board used to demonstrate a compact 17mm x 17mm 35A synchronous buck converter. Transient performance, fault protections, DC/AC...
Featured Documents:
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.
Product Options
Processing table
| 2033 Dec | QFN | Tube | 750 | Get Samples, | |
ISL68201IRZ-T Active Samples Available |
2033 Dec | QFN | Reel | 6000 | Get Samples, |
ISL68201IRZ-T7A Active Samples Available |
2033 Dec | QFN | Reel | 250 | Get Samples, |
ISL68201IRZ-TK Active Samples Available |
2033 Dec | QFN | Reel | 1000 | Get Samples, |
Tips for Using This Parametric Table:
- Hide Filters button in header: Collapse or expands filters
- Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
- Reset button in header: Reset all filters to the page default
- Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
- Export button in header: Export the filtered results of the table to an Excel document
- Filter parts search bar in header: Type to filter table results by part number
- Hide column button in column headers: Select to hide columns in table
- AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
- Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
- Document icon next to product name in row: View the featured document for this product
- Chip icon next to the right of the document icon in row: View the block diagram for this product
- Cart icon to the right of the chip icon: Indicates that samples are available for this product