Features
- Optimized for smartphone and notebook/tablet PC applications
- 7.8mΩ RDSON while supporting 5.3A
- Power supply: 2.5V ≤ VDD ≤ 5.5 V
- Input voltage range: 0.85V ≤ VD ≤ VDD
- Output voltage slew-rate control by an external capacitor
- Overcurrent and over-temperature protection
- Output discharge circuitry
- Sleep mode current (IDDOFF) in low µA range
Description
The SLG59M1496V is a 7.8mΩ 5.3A single-channel load switch that can switch 0.85V to 5.5V power rails. The product is packaged in an ultra‑small 1.5mm x 2.0mm package.
Parameters
| Attributes | Value |
|---|---|
| FET Pass Device Type | Single N-Channel |
| VDD min. (V) | 2.5 |
| VDD max. (V) | 5.5 |
| VIN Channel 1 min. (V) | 0.85 |
| VIN Channel 1 max. (V) | 5.5 |
| Input Quiescent Current Channel 1, typ (µA) | 70 |
| Input Quiescent Current Channel 1, max (µA) | 100 |
| Input Quiescent Current when OFF Channel 1, max (µA) | 1 |
| RDSON (Typ) Channel 1 (mΩ) | 7.8 |
| IDS Channel 1 (A) | 5.3 |
| Enable | Active High |
| Output Voltage Slew Rate set by | Capacitor |
| Discharge Circuit | Yes |
| Undervoltage Protection | No |
| Over Voltage Protection | No |
| Power Good (PG), FAULT indicator | No |
| Reverse current blocking | No |
| Reverse voltage detection | No |
| Over Current Protection (OCP) | Internally Fixed |
| Over Current Protection Setting Range Channel 1 | 7 - 7 |
| Short Circuit Protection | Yes |
| Over Temperature Protection (OTP) | Yes |
| Current Monitor Output | No |
| Internal TVS Surge Protection | No |
| Temp. Range (°C) | -40 to +85°C |
Applications
- Notebook Power Rail Switching
- Tablet Power Rail Switching
- Smartphone Power Rail Switching
Renesas Boards & Kits
SLG59M1496V Evaluation Board
The SLG59M1496V-EVB board evaluates the SLG59M1496V GreenFET, Single N-Channel, Load Switch.
For details on how to use the evaluation board, please refer to the evaluation board user manual included in the datasheet.
Support Communities
-
How to order eval board for SLG59M1496V
How can I order an eval board for the SLG59M1496V? I see a board pictured in the SLG59M1496V Layout Guide ('GFET3 Evaluation Board #7'), but I can't find it online.
Nov 15, 2018 -
Need thermal resistance of SLG59M1496V
I need the thermal resistance of this part (in 8-pin FC-TDFN package).
Nov 14, 2018 -
Vin bypass requirements for SLG59M1496V
The SLG59M1496V layout guide says both a 0.1uF and 10uF cap are needed on Vdd. This is a little high for our application. Can the part operate correctly with a lower Vdd bypass (say a single 1uF MLCC)? We'll be running at 3.3V.
Nov 14, 2018
Support Communities
