Features
- Flash on the module, makes upgrading easy
- ETSI DECT (GAP) compliant
- Connects with up to six portable units
- UART interface for an external host
- Software support for embedded solutions
- Supports voice and low-speed data
- Power management support
- A one-fits-all module running on an ETSI standardized protocol in an interference-free band, supporting
- DECT
- DECT 6.0
- J-DECT
- CAT-iq
- Operates as fixed part or portable part
- Contains the complete protocol stack
- Fully TBR6, FCC approved and J-DECT pre-certified
- Works simply with an API interface set
- Fully tested module, eliminates the need for RF testing
- A complete set of software examples included
Description
The SC14CVMDECT Cordless Voice Module (CVM) Development Kit consists of two development boards with headsets, enabling voice connection setup. It enables the easy and cost-effective development of cordless applications and significantly reduces the time-to-market.
All the features of the module are accessible through the pins on the development board, while buttons and LED statuses can be changed and checked. The CVM kit comes with the Athena development environment, an Eclipse-based IDE that provides a development environment for the CR16C+ series of microcontrollers, and a GNU cross compiler/linker for CR16 – removing the need for an external microcontroller.
Product Comparison
| SC14CVMDECT | DA14AVDDECT | |
| Processor CPU MIPS (MIPS) | - | 165 |
| Processor DSP MIPS (MIPS) | - | 290 |
| I/O Type | - | PCM, SPI, UART, USB 2.0 |
| Data Rate (Mbps) | - | 0.0016 |
| Bandwidth (MHz) | - | 0.02 |
| Charge Control | - | Li-ion |
| Software Support | - | Flexible API Interface |
Applications
- Hosted or embedded cordless intercom
- Hosted or embedded cordless baby phone monitor
- Hosted wireless data applications up to 1.6Kbit/s (e.g., point-of-sales (PoS) terminals) or use the new CAT-iq LU-10 feature of 54kbit/sec
- Set-top boxes
- Routers and wireless xDSL/cable modems
- Industrial control systems
- Burglar alarms
- Wireless local loop (WLL)
- Pendant applications
- All other point-to-point connections
Support Communities
-
SC14CVMDECT and spectralink dect base station
... ImageStatus: 0:FP_CVM = RSS_OFFLINE: Image Disabled. 1:PP_CVM = RSS_SUCCESS: Image is running. 2:COLA = RSS_OFFLINE: Image Disabled. on the server, SC14CVMDECT IPEI is given a phone number. I tried calling from a dect phone to SC14CVMDECT. And it doesn't work. SC14CVMDECT doesn't answer ...
Jul 18, 2018 -
SC14CVMDECT PCM Master/Slave roles
We would like to configure the SC14CVMDECT as Fixed Part and interface audio input/output through PCM. Does PCM support both master and slave roles in Fixed part configuration ?
May 7, 2021 -
SC14CVMDECT intercom help
... kit to test the solution. At this moment I have two questions: 1) are SC14SPNODE modules capable to transmit sound and are firmware compatible with SC14CVMDECT modules? 2) SC14ULEDEVKT came with Eclipse example projects for IoT, are there any accessible examples for using SC14CVMDECT as audio modules? Thank you in ...
Jan 8, 2024
Support Communities
