Overview
Description
Designed for high-compute, performance-intensive, networked control applications requiring full memory redundancy, the S7G2 MCU Group has 3MB to 4MB of flash memory and 640KB of SRAM. Rich in features, it includes a graphics LCD controller, 2D drawing engine, Capacitive Touch Sensing Unit (CTSU), advanced analog, Ethernet MAC controller with IEEE 1588 PTP, USB 2.0 High-Speed and Full-Speed, SDHI, quad SPI, and safety and security features, to handle a wide range of complexity.
Commercial software worth over $100K which is available to developers using the Synergy Platform for no charge and with unlimited production license rights. The production-ready SSP is fully tested, maintained, and supported by Renesas.
Features
- 240MHz Arm® Cortex®-M4 CPU
- Designed for high-compute, performance-intensive, networked control applications requiring full memory redundancy
- Graphics LCD controller
- 2D drawing engine
- Capacitive Touch Sensing Unit
- Advanced analog
- Ethernet MAC controller with IEEE 1588 PTP
- USB 2.0 High-Speed and Full-Speed
- SDHI
- Quad SPI
- Safety and security features, to handle a wide range of complexity
Comparison
Applications
Design & Development
Software & Tools
Sample Code
Boards & Kits
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Resources
Support Communities
-
Increase baud rate for Cellular modem connected to S7G2 for higher data throughput
We are using the S7G2 MCU which is connected to an Cellular modem(Quectel) over a UART interface.The MCU is configured to communicate to the modem using 115200 baud rate and uses NetX Duo IP stack.We are seeing low communication link speeds for a network and want to ...
Mar 12, 2025 -
SDRAM utilization_Synergy S7G2
Hi, Part used: Synergy S7G2 I need some clarification of usage of the 32MB SDRAM(pms307416a) as per the below image we have BA1 and BA0 for selecting the RAM location to operate. Do we need to take care of these pins in the application program or ssp, system BUS0 ...
Jul 18, 2022 -
DK-S7G2M with QSPI as filesystem sample
Hello, I am searching for a sample for the demo board DK-S7G2M with QSPI as filesystem ?? best regards Peter
Mar 21, 2019
FAQs
-
Blinky Labs: Blinky from Scratch
... with descriptions and other information to make it easy to write code for the modules available in the configurator. This lab uses the Synergy SK-S7G2 Starter Kit and a simple Blinky application to illustrate the capability of Developer Assistance and other code development features useful for accelerating project development ...
Jan 1, 1970 -
Renesas Synergy: How to Specify Access Timing to MII/RMII Registers During Ethernet PHY Initialization
Yes, you can adjust the following ETHER_CFG_PHY_MII_WAIT macro values by setting them in compiler options: This value is used by the phy_mii_write0, phy_mii_write1, phy_reg_read, and phy_idle functions. Refer to the data sheet of your Ethernet PHY device and adjust ...
Dec 20, 2024 -
NetX DHCPv6 Server Module Guide Resources
... table of DHCPv6 leases assignable to requesting clients Module Guide The module guide is targeted for SSP 1.2.0 and above and the SK-S7G2 Kit. The most recent versions of the module guide application note, application project and import guide are available here. Module Guide Resources The Express ...
Jan 1, 1970