Overview
Description
RZ/T2M is an industry-leading high-performance multi-function MPU that realizes high-speed processing, high precision control, and functional safety required for industrial equipment such as AC servos and industrial motors. Powered by dual Arm® Cortex®-R52 cores with a maximum frequency of 800MHz for real-time control and embedded with a large tightly coupled memory (576KB) directly connected to the CPU to realize high-performance real-time processing, RZ/T2M enables low latency access by arranging the peripherals for motor control to the LLPP (Low Latency Peripheral Port) that is directly connected to the CPU. RZ/T2M has a multi-protocol encoder interface that supports various absolute encoder protocols such as A-format™, EnDat, and BiSS®. Additionally, RZ/T2M has a 3-port Gigabit Ethernet switch supporting the TSN standard and EtherCAT slave controller. RZ/T2M realizes high speed and highly precise motor control and industrial Ethernet communication such as EtherCAT, PROFINET RT/IRT and EtherNet/IP on a single chip.
Features
- CPU: Arm® Cortex®-R52 x 2, maximum operating frequency 800MHz
- 3-port Gigabit Ethernet switch with TSN
- Trigonometric function accelerator
- Memory: Tightly coupled memory 576KB (with ECC), internal RAM 2MB (with ECC)
- Industrial Ethernet: EtherCAT®, PROFINET® RT/IRT, EtherNet/IP™, etc.
- Encoder interface: 2ch (supports A-format™, EnDat, BiSS®, HIPERFACE® DSL, FA-CODER）
- Functional safety support up to SIL3
- Motor current loop < 1µs
- Octa/Quad SPI support
- PWM: 3-phase complementary PWM output for dual motor control
- ADC: 12-bit x 2 units
- ΔΣ I/F: 6ch
- Package: 320-pin BGA, 225-pin BGA, 176-pin QFP, 128-pin QFP
- Voltage: Core 1.1V, I/O 3.3/1.8V
Comparison
Applications
Design & Development
Software & Tools
Software Downloads
|
|
|
|
|---|---|---|
| Type | Title | Date |
| Software & Tools - Software |
[Software=RZ/T2 Flexible Software Package Setup|v1.10],[Toolchains=GNU ARM Embedded Toolchain|v12.2.Rel 1;IAR Embedded Workbench for ARM v9.60.1]
ZIP
50.61 MB
Application:
Industrial
Compiler:
GCC, ICCARM
IDE:
e2 studio, IAR EWARM
|
|
| Software & Tools - Software |
EXE
770.34 MB
日本語
Application:
Industrial
|
|
| Software & Tools - Software |
EXE
1,397.47 MB
日本語
Application:
Industrial
|
|
3 items
|
||
Sample Code
Boards & Kits
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Support Communities
-
RZ/T2M kit cant run to hal_entry()
my RSK+ RZT2M board is good at first， Reference documents rzt2m-getting-started-flexible-software-package.pdf Figure 2: Boot MODE SW Setting Description SW4.1 ON 16-bit bus boot mode (NOR Flash) SW4.2 OFF SW4.3 ON SW4.4 ON JTAG Authentication by Hash is disabled. SW4 ...
Sep 7, 2022 -
RZ/T2M kit cant run to hal_entry()
my RSK+ RZT2M board is good at first， Reference documents rzt2m-getting-started-flexible-software-package.pdf Figure 2: Boot MODE SW Setting Description SW4.1 ON 16-bit bus boot mode (NOR Flash) SW4.2 OFF SW4.3 ON SW4.4 ON JTAG Authentication by Hash is disabled. SW4 ...
Sep 7, 2022 -
How to bring up RZ/T2M SCI/UART (USB serial port: USB Mini-B:CN16)?
Hi, I have an EVK RZ/T2M board. To bring up RZ/T2M SCI/UART (USB serial port: USB Mini-B:CN16), I have done the steps below. 1) Installed e² studio tool, FSP packs, GCC toolchain and other necessary tools for a new user via setup ...
Oct 4, 2022
FAQs
-
RZ/T2M: What operating systems are supported?
FreeRTOS is supported with our Flexible Software Package (FSP). Please contact us with respect to other operating systems.
Jun 7, 2022 -
RZ/T2M: Cannot debug a secondary project for multicore processing with flash boot mode in e² studio.
If the download does not finish within the GDB command timeout period, the startup may fail.Please refer to the related FAQ: e² studio debugger failed with timeout error to extend the timeout period.
Dec 25, 2024 -
Please tell me about the types of reset of the RZ/T2M, and their initialization targets.
The RZ/T2M has the five types of reset shown in Table 5.1.For the initialization targets of each reset, refer to Table 5.2.
Jun 7, 2022
Videos & Training
This video provides an overview of all the tabs in the FSP Configuration, except for the [Pin] tab, which is covered in the Pin Configuration Function video.
Chapter's Title
00:10 Overview
00:44 Introduction of Summary Tab
01:22 Introduction of Bsp Tab
03:39 Introduction of Clocks Tab
04:52 Introduction of Stacks Tab
05:42 Introduction of Interrupts Tab
06:30 Introduction of Event Links Tab
07:13 Introduction of Components Tab
Related Resources
FSP Links
Board Links
User's Manual links
Video Link