Features
- CPU:Cortex-M3(125MHz)
- Voltage: 3V for IO, 1.15V for CPU
- Package: 196pin LFBGA (12 x 12mm, 0.8 pitch)
- Memory: SRAM 6MB with ECC
- Ethernet port: max 3
- Independent GMAC: 1 port
- Ethernet Switch
- EtherCAT slave controller
- SERCOSⅢ slave controller
Description
RZ/N1L equipped with "Renesas R-IN engine (“R-IN engine”)" which is an accelerator for industrial Ethernet communication can be used for the communication parts of industrial network device where real - time responsibility is required. With integrated EtherCAT and Sercos III slave dedicated H/W, it is possible to handle a wide range of protocols.
| Part Number | Status | Samples | Stock | Package | Budgetary Price (USD) | Carrier Type | Family Name | Series Name | Group Name | CPU Architecture | Main CPU | Sub CPU | Floating Point Unit | Bit Length | Program Memory (KB) | Data Flash (KB) | RAM (KB) | ECC SRAM | Lead Count (#) | Pitch (mm) | Pkg. Dimensions (mm) | Number of Supply Voltage(s) (#) | Supply Voltage (V) | I/O Ports | DMAC or DTC | DMA (ch) | Temperature Sensor (ch) (#) | Power-On Reset | Watchdog Timer (ch) | External Memory Bus (bit) | DRAM I/F | NPU | 3D GPU | Accelerator | MOQ | Temp. Range (°C) | External Interrupt Pins (#) | LVD or PVD | Operating Freq (Max) (MHz) | Sub-clock (32.768 kHz) | On-chip Oscillator | Ethernet speed | Ethernet (ch) | EtherCat (ch) (#) | USB Ports (#) | USB FS (host ch/device ch) | USB HS (host ch/device ch) | USB SS (host ch/device ch) | PCI Express (generation and ch) | SCI or UART (ch) | SPI (ch) | QSPI (ch) | OSPI (ch) | I2C (#) | I3C (ch) | CAN (ch) | CAN-FD (ch) | Wireless | IrDA | LIN (#) | SDHI (ch) | High Resolution Output Timer | PWM Output (pin#) | 32-Bit Timer (ch) | 16-Bit Timer (ch) (#) | 8-Bit Timer (ch) | Standby operable timer | Asynchronous General Purpose Timer / Interval Timer (ch) | RTC | 16-Bit A/D Converter (ch) | 14-Bit A/D Converter (ch) | 12-Bit A/D Converter (ch) | 10-Bit A/D Converter (ch) | 24-Bit Sigma-Delta A/D Converter (ch) | 16-Bit D/A Converter (ch) | 12-Bit D/A Converter (ch) | 10-Bit D/A Converter (ch) (#) | 8-Bit D/A Converter (ch) | Analog Comparator (ch) | OPAMP (ch) (#) | PGA (ch) | Capacitive Touch Sensing Unit (ch) | Graphics LCD Controller | MIPI Interfaces (DSI) (ch) | MIPI Interfaces (CSI) (ch) | Camera I/F (Parallel) | Image Codec | 2D Drawing Engine | Segment LCD Controller | SSI (ch) | Security & Encryption | Debug Interface | Remarks | Moisture Sensitivity Level (MSL) | Country of Assembly | Country of Wafer Fabrication |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| R9A06G034VGBA#AC1 | Last Time Buy | N/A | In Stock | LFBGA | 1ku | $11.63 | Bulk (Tray) | RZ | RZ/N | N1L | Arm | Cortex-M3 | No | No | 32 | 0 | 0 | 6144KB | Yes | 196# | 0.8mm | 12 x 12 x 1.7 | 3# | 3 - 3.6 | 95 | DMAC | 16 | 0 | No | 1 | No | No | No | No | R-IN Engine | 1 | Tj = -40 to +110 | 8# | No | 125MHz | No | No | 10M/100M/1G | 3ch | 1# | 2# | ( 2 / 1 ) | ( 2 / 1 ) | ( 0 / 0 ) | No | 8 | 6 | 1 | 0 | 2# | 0 | 2 | 0 | No | No | 0 | 2 | No | 16 | 4 | 12# | 0 | No | 0 | No | 0 | 0 | 8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | No | 0 | 0 | No | No | No | No | 0 | No | JTAG/SWD | Industrial Ethernet | 3 | JAPAN | JAPAN |
Filters
Applied Filters
- Manual - HardwareRZ/N1D features dual Cortex®‑A7 cores, a high‑speed and large‑capacity memory interface, and supports up to five Ethernet ports as well as redundancy protocols, making it ideal for PLCs and industrial switches. RZ/N1S integrates a single‑core Cortex®‑A7 and large on‑chip RAM into a compact package, making it suitable for small PLCs/HMIs, gateways, and sensor hubs. RZ/N1L incorporates dedicated EtherCAT slave hardware and can be used in the communication section of industrial networks. RZ/N1x User’s Manual provides hardware information peripheral functions, including harware real-time OS, Gigabit Ethernet MAC, Advanced 5-port Switch (A5PSW), EtherCAT, Sercos III, and HSR/PRP.
- Manual - HardwareRZ/N1D features dual Cortex®‑A7 cores, a high‑speed and large‑capacity memory interface, and supports up to five Ethernet ports as well as redundancy protocols, making it ideal for PLCs and industrial switches. RZ/N1S integrates a single‑core Cortex®‑A7 and large on‑chip RAM into a compact package, making it suitable for small PLCs/HMIs, gateways, and sensor hubs. RZ/N1L incorporates dedicated EtherCAT slave hardware and can be used in the communication section of industrial networks. English translation: RZ/N1x User’s Manual provides hardware information required for system design, including operating modes, peripheral functions, electrical characteristics, and package details.
- Manual - HardwareRZ/N1D features dual Cortex®‑A7 cores, a high‑speed and large‑capacity memory interface, and supports up to five Ethernet ports as well as redundancy protocols, making it ideal for PLCs and industrial switches. RZ/N1S integrates a single‑core Cortex®‑A7 and large on‑chip RAM into a compact package, making it suitable for small PLCs/HMIs, gateways, and sensor hubs. RZ/N1L incorporates dedicated EtherCAT slave hardware and can be used in the communication section of industrial networks. RZ/N1x User’s Manual provides hardware information on CPU and memory configuration, internal buses, and peripheral functions, including NAND, SPI, SDIO, USB, DMA, RTC, watchdog timer, and mailbox.
- Application NoteAI-generated Summary: The document explains how to integrate and use IAR Systems compilers within the e² studio development environment for Renesas microcontrollers. It details the installation of IAR Embedded Workbench and IAR Eclipse plugins, project creation, build configuration, and build execution using IAR compilers. The guide focuses on the RA family with the IAR ARM compiler but applies similarly to other Renesas devices. It also recommends using standalone Flexible Software Package configurators for RA and RZ families to enhance development. The environment setup assumes Windows 10 64-bit, e² studio 2024-07, and IAR tools installed.
- Technical Update
- Manual - HardwareRZ/N1D features dual Cortex®‑A7 cores, a high‑speed and large‑capacity memory interface, and supports up to five Ethernet ports as well as redundancy protocols, making it ideal for PLCs and industrial switches. RZ/N1S integrates a single‑core Cortex®‑A7 and large on‑chip RAM into a compact package, making it suitable for small PLCs/HMIs, gateways, and sensor hubs. RZ/N1L incorporates dedicated EtherCAT slave hardware and can be used in the communication section of industrial networks. Z/N1x User’s Manual provides hardware information on CPU and memory configuration, internal buses, and peripheral functions, including UART, SPI, I2C, GPIO, Timer, CAN, ADC, LCD controller, semaphore, and MSEBI.
- Datasheet
- Technical Update
- Datasheet
- Manual - HardwareRZ/N1D features dual Cortex®‑A7 cores, a high‑speed and large‑capacity memory interface, and supports up to five Ethernet ports as well as redundancy protocols, making it ideal for PLCs and industrial switches. RZ/N1S integrates a single‑core Cortex®‑A7 and large on‑chip RAM into a compact package, making it suitable for small PLCs/HMIs, gateways, and sensor hubs. RZ/N1L incorporates dedicated EtherCAT slave hardware and can be used in the communication section of industrial networks. English translation: RZ/N1x User’s Manual provides hardware information required for system design, including operating modes, peripheral functions, electrical characteristics, and package details.
Recommended Documents (2)
- Datasheet
Datasheets (1)
- Manual - HardwareRZ/N1D features dual Cortex®‑A7 cores, a high‑speed and large‑capacity memory interface, and supports up to five Ethernet ports as well as redundancy protocols, making it ideal for PLCs and industrial switches. RZ/N1S integrates a single‑core Cortex®‑A7 and large on‑chip RAM into a compact package, making it suitable for small PLCs/HMIs, gateways, and sensor hubs. RZ/N1L incorporates dedicated EtherCAT slave hardware and can be used in the communication section of industrial networks. RZ/N1x User’s Manual provides hardware information peripheral functions, including harware real-time OS, Gigabit Ethernet MAC, Advanced 5-port Switch (A5PSW), EtherCAT, Sercos III, and HSR/PRP.
- Manual - HardwareRZ/N1D features dual Cortex®‑A7 cores, a high‑speed and large‑capacity memory interface, and supports up to five Ethernet ports as well as redundancy protocols, making it ideal for PLCs and industrial switches. RZ/N1S integrates a single‑core Cortex®‑A7 and large on‑chip RAM into a compact package, making it suitable for small PLCs/HMIs, gateways, and sensor hubs. RZ/N1L incorporates dedicated EtherCAT slave hardware and can be used in the communication section of industrial networks. English translation: RZ/N1x User’s Manual provides hardware information required for system design, including operating modes, peripheral functions, electrical characteristics, and package details.
- Manual - HardwareRZ/N1D features dual Cortex®‑A7 cores, a high‑speed and large‑capacity memory interface, and supports up to five Ethernet ports as well as redundancy protocols, making it ideal for PLCs and industrial switches. RZ/N1S integrates a single‑core Cortex®‑A7 and large on‑chip RAM into a compact package, making it suitable for small PLCs/HMIs, gateways, and sensor hubs. RZ/N1L incorporates dedicated EtherCAT slave hardware and can be used in the communication section of industrial networks. RZ/N1x User’s Manual provides hardware information on CPU and memory configuration, internal buses, and peripheral functions, including NAND, SPI, SDIO, USB, DMA, RTC, watchdog timer, and mailbox.
- Manual - HardwareRZ/N1D features dual Cortex®‑A7 cores, a high‑speed and large‑capacity memory interface, and supports up to five Ethernet ports as well as redundancy protocols, making it ideal for PLCs and industrial switches. RZ/N1S integrates a single‑core Cortex®‑A7 and large on‑chip RAM into a compact package, making it suitable for small PLCs/HMIs, gateways, and sensor hubs. RZ/N1L incorporates dedicated EtherCAT slave hardware and can be used in the communication section of industrial networks. Z/N1x User’s Manual provides hardware information on CPU and memory configuration, internal buses, and peripheral functions, including UART, SPI, I2C, GPIO, Timer, CAN, ADC, LCD controller, semaphore, and MSEBI.View More (8)
Manuals & Guides (8)
- Application NoteAI-generated Summary: The document explains how to integrate and use IAR Systems compilers within the e² studio development environment for Renesas microcontrollers. It details the installation of IAR Embedded Workbench and IAR Eclipse plugins, project creation, build configuration, and build execution using IAR compilers. The guide focuses on the RA family with the IAR ARM compiler but applies similarly to other Renesas devices. It also recommends using standalone Flexible Software Package configurators for RA and RZ families to enhance development. The environment setup assumes Windows 10 64-bit, e² studio 2024-07, and IAR tools installed.
- Application NoteRelated Files:
- Application NotePDF 2.6 MB R11AN0282EJ0014 Rev.0.14 Aug 01, 2019AI-generated Summary: The content outlines the RZ/N1x Group Bare Metal Drivers, detailing various driver types such as DMA, GMAC, GPIO, I2C, IOMUX, LCDC, MSEBI, QSPI, RTC, SDIO, Semaphore, SPI, Timer, UART, USB, and WDT. It includes configuration overviews, code size, API data structures, and detailed API functions for IOMUX, SYSCTRL, BSP, ADC, CAN, DMA, and GMAC. Each section provides summaries, return values, and specific function descriptions for enabling, disabling, configuring, and controlling hardware features.
- Application NotePDF 1.19 MB R01AN4239EJ0110 Rev.1.10 Mar 29, 2019AI-generated Summary: EtherCAT runs on the Cortex-M3 core in both standalone and Core To Core variants of the RZ/N1 series, with the Cortex-A7 core handling user applications in the Core To Core variant. The SSC Tool generates customized EtherCAT Slave Stack Code supporting basic slave functions and mailbox protocols like CoE and FoE. The guide explains testing EtherCAT slave functions using TwinCAT Master and details project setup requirements including supported boards, IDE, emulator, and software versions.
- Application NotePDF 3.51 MB R01AN4412EJ0120 Rev.1.20 Dec 28, 2018AI-generated Summary: Modbus protocol runs on the Cortex-M3 core of the RZ/N1 series, supporting both standalone and dual-core configurations with communication handled via the GOAL layer. It supports Modbus RTU, ASCII, and TCP protocols, enabling communication over serial and Ethernet networks. The Modbus stack operates in six modes, including master and slave for RTU and ASCII, TCP server, and TCP-serial gateway. It supports nine standard Modbus function codes for reading and writing coils and registers. The document details testing procedures using CODESYS and provides technical references.
Application Notes & White Papers (5)
- Product Change Notice
- Product Change Notice
- Product Change Notice
Product Notices (PCN, EOL, etc) (5)
- Technical Update
- Technical Update
Errata & Technical Updates (7)
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
Quality & Reliability (1)
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
Marketing Collateral (1)
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
Renesas Boards & Kits
CONNECT IT! ETHERNET RZ/N
CONNECT IT! ETHERNET RZ/N is the perfect solution kit for developers new to developing with the RZ/N1. The kit comes with not only an evaluation board but also a JTAG emulator and various sample software. By setting up the board according to the startup manual, you can evaluate Linux OS or... Read More
Partner Boards & Kits
DRAM & Flash Memory Solutions
Filters
Applied Filters
Software & Tools
Filter by Type
Filter by Provider
Sample Code
Filter by Application
Filter by Function
Filter by Compiler
Filter by IDE
Simulation Models
Partner Solutions
- Sample CodeRelated Files:
- Model - IBIS
- Model - IBIS
- Development ToolSupporting Arm® and RX microcontrollers, the SEGGER J-Link series is an industry-standard debugger for software development. High-speed programming algorithms reduce binary transfer time and accelerate development cycles. Broad compatibility supports Renesas e² studio, major IDEs, and RZ, RA, and RX devices. Advanced analysis with Ozone and ...Provided By: EmbiTeK Co., Ltd.
- Development ToolProvides universal device programming systems combining algorithms, process-control software, and socket modules for Renesas microcontroller production. Enables high-volume programming across the RA, RX, RL78, RH850, RZ, R8C, V850, M16C, H8, H8SX, H8S, SH, 78K and Synergy families using 9th- and 10th-generation universal site technology. Supports new socket ...Provided By: BPM Microsystems
- Development ToolAll-in-one testing tool for C and C++ developed by Parasoft that supports static analysis, unit testing, coverage measurement, and runtime memory error detection. Supports coding enforcement based on standards such as MISRA, AUTOSAR, CERT, and CWE, and enables automatic coverage collection during unit testing and application execution. Includes ...Provided By: TECHMATRIX CORPORATION
- Development ToolProvides tools for developing real‑time, safety‑ and security‑critical embedded software by combining static analysis, unit testing, code coverage, requirements traceability, and compliance reporting in a unified workflow. Supports a TÜV SÜD‑certified GoogleTest‑based unit testing solution and integrates with modern development toolchains and continuous integration and continuous ...Provided By: PARASOFT
- HMIHigh-performance, scalable and hardware-independent HMI software toolchain for embedded systems. Enables development of customizable 2D and 3D graphical user interfaces with a designer-centric workflow, WYSIWYG editor, no-coding methodology and AI-assisted Smart Importer. Integrated state machine and automated workflows accelerate development. Scales efficiently from low-end ...Provided By: Candera GmbH
- Development ToolCODESYS is the wide-spread hardware independent IDE for industrial control applications according to IEC 61131-3. It includes editors and compilers for different CPU architectures, including Arm® and RX based systems. Furthermore, with CODESYS users can immediately connect industrial fieldbus and communication systems due to integrated configurators and ...Provided By: CODESYS GmbH
- Sensing & ControlCODESYS compatible controllers need an implemented CODESYS Control runtime system. The CODESYS Runtime Toolkit includes object and source code for the runtime system, which can be adapted to the device specific characteristics and demands. Furthermore, the base functions can be extended by integrated add-ons, e.g. for industrial fieldbus ...Provided By: CODESYS GmbH
- HMIThis solution provides a GUI development environment for embedded systems. It enables visual user interface design through a dedicated designer and supports deployment via a runtime execution engine on target devices. It supports Linux-based systems and resource-constrained embedded real-time operating systems, delivering smart devicelike user interface ...Provided By: OSAKA NDS CO., LTD.
- AIProvides local free speech control by combining speech recognition and natural language processing. Enables users to give natural and intuitive voice commands without memorizing specific terms. Supports developer tools for creating applications with simple text input, requiring no training data. Runs on Renesas RA8 microcontroller unit (MCU) platforms.Provided By: Cyberon
- AIProvides in‑cabin safety and monitoring solutions using NPU compatible technology to enhance vehicle safety during operation. Supports real‑time vision‑based analytics such as driver monitoring and crowd counting, optimized for Renesas RZ/V2H MPU with the DRP-AI3 accelerator to achieve high accuracy with low-power consumption ...Provided By: Nota AI
- Application Specific SWTransforms standard cameras into edge AI Vision sensors for continuous, privacy-preserving traffic and pedestrian flow monitoring. Powered by the Renesas RZ/V2L Microprocessor Unit (MPU) with 18MB RAM/ROM and 67ms inference time, all AI processing runs on-device with no cloud dependency. Supports vehicle detection, object ...Provided By: Irida Labs
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
Software & Tools (1)
- Sample CodeRelated Files:
Sample Code (1)
- Model - IBIS
- Model - IBIS
Simulation Models (2)
- Development ToolSupporting Arm® and RX microcontrollers, the SEGGER J-Link series is an industry-standard debugger for software development. High-speed programming algorithms reduce binary transfer time and accelerate development cycles. Broad compatibility supports Renesas e² studio, major IDEs, and RZ, RA, and RX devices. Advanced analysis with Ozone and ...Provided By: EmbiTeK Co., Ltd.
- Development ToolProvides universal device programming systems combining algorithms, process-control software, and socket modules for Renesas microcontroller production. Enables high-volume programming across the RA, RX, RL78, RH850, RZ, R8C, V850, M16C, H8, H8SX, H8S, SH, 78K and Synergy families using 9th- and 10th-generation universal site technology. Supports new socket ...Provided By: BPM Microsystems
- Development ToolAll-in-one testing tool for C and C++ developed by Parasoft that supports static analysis, unit testing, coverage measurement, and runtime memory error detection. Supports coding enforcement based on standards such as MISRA, AUTOSAR, CERT, and CWE, and enables automatic coverage collection during unit testing and application execution. Includes ...Provided By: TECHMATRIX CORPORATION
- Development ToolProvides tools for developing real‑time, safety‑ and security‑critical embedded software by combining static analysis, unit testing, code coverage, requirements traceability, and compliance reporting in a unified workflow. Supports a TÜV SÜD‑certified GoogleTest‑based unit testing solution and integrates with modern development toolchains and continuous integration and continuous ...Provided By: PARASOFT
- HMIHigh-performance, scalable and hardware-independent HMI software toolchain for embedded systems. Enables development of customizable 2D and 3D graphical user interfaces with a designer-centric workflow, WYSIWYG editor, no-coding methodology and AI-assisted Smart Importer. Integrated state machine and automated workflows accelerate development. Scales efficiently from low-end ...Provided By: Candera GmbHView More (68)
Partner Solutions (68)
Support Communities
-
RZ/N1L TCP throughput test with GOAL project TCP server.
Hi, I am trying to use RZ/N1L and the goal project "tcp_server" to have an easy TCP throughput test. I have downloaded the FW into the board without any modification, however I can't find a good way to test it. I have tested several tools like ...
Sep 4, 2019 -
Mailbox stress test, RZN1D
Hello, My application uses a mailbox linked to shared memory block. In some cases, I am sending a mailbox at a high frequency every 1 mSec from CM3 to CA7. However, the CA7 runs code that takes 10mSec per iteration and only after it completes can i retrieve the mailbox ...
Jan 27, 2025 -
Bare-metal image on A7 core
Hi, I try to load the sample from SolKit.V1.4.3\Software\BaremetalDrivers to QSPI FLASH. I built a RAW binary for A7 core and try to upload it to QSPI by U-boot, according the document. USB DFU A7 set env command: => setenv bootcmd "dcache off&& ...
Jul 30, 2020
Knowledge Base
-
RZ Family: Can HW-RTOS-GMAC be used even if HW-RTOS does not used?
... is disabled manual configuration of HW-RTOS GMAC is required. Please refer the following section in the "RZ/N1D Group, RZ/N1S Group, RZ/N1L Group User’s Manual: R-IN Engine and Ethernet Peripherals": Section 3.5.1 Initialization (1) Initial Settings of HW-RTOS GMAC ...
Nov 14, 2025