2 results found for "47654"
- Support ForumsHi, In trying to get CAN Bus working for Linux 4.9 it seems like there is a driver for the R-Car r8 chips, but there isn't one for the RZ r7. I found a driver for the RZ chip in Linux 3.14, but there isn't any .dts file for it and Linux 3.14 has l...
- Support ForumsI need to create a function that accepts a &PORTn (pointer to struct type: volatile __evenaccess st_port8 * / volatile __evenaccess st_portA * / volatile __evenaccess st_portB * / ...) I have created a function that accepts a pointer of any type (...
- Previous Page
- 1
- Next Page
Knowledge Base
- Question: I am analyzing an electronics design using the HS-26C31 line driver and HS-26C32 line receiver and I would like to study the failure mode of these chips. For each case, will the parts be damaged or is there protection built into the part...
- Question:I understand the HS-26C32 and HS-26CT32 have a failsafe operation, but what if both inputs are shorted to ground? Is there a guaranteed output stated? Answer:Failsafe operation depends on a true high impedance condition at the inputs. Som...
Support Communities
- Hi, In trying to get CAN Bus working for Linux 4.9 it seems like there is a driver for the R-Car r8 chips, but there isn't one for the RZ r7. I found a driver for the RZ chip in Linux 3.14, but there isn't ...
- I need to create a function that accepts a &PORTn (pointer to struct type: volatile __evenaccess st_port8 * / volatile __evenaccess st_portA * / volatile __evenaccess st_portB * / ...) I have created a function that accepts a pointer of any type (...
From CS+ Support
Loading