Renesas Electronics Corporation
Search

ISL70100M

NEW Active

Rad Tolerant 40V Current Sense Amplifier

Order Now

Overview

The ISL70100M is a radiation tolerant 40V current sense amplifier built on the Renesas proprietary PR40 Silicon-on-Insulator (SOI) process. The device has a wide power supply range of 2.7V to 40V. The input common-mode voltage is independent of the supply voltage and extends from -0.3V to 40.0V, making it ideal to use in both high-side and low-side applications.

The ISL70100M is a transconductance amplifier that monitors current using an external sense resistor and outputs a current proportional to the sensed voltage. The overall voltage gain is adjustable with a single resistor from the output to ground.

The amplifier has an extremely low offset voltage and input bias currents, making it ideal for precision sensing applications. It has a minimum bandwidth of 500kHz with a slew rate of 500µA/µs that makes it useful for current feedback in telemetry applications. When the part is powered down (V+ = V- = 0V), the sense pins (RS+, RS-) are high impedance to avoid loading the monitored circuit.

The part is available in a plastic 14Ld TSSOP package and operates across the temperature range of -55°C to +125°C.

ISL70100M Block Diagram
ISL70100M Block Diagram
  • Qualified to Renesas Rad Tolerant Screening and QCI Flow (R34TB0004EU)
  • Power supply range: 2.7V to 40V
  • Input common-mode range: -0.3V to 40V
  • Transconductance: 2µA/mV (typical)
    • ±1% accuracy (TA = 25°C)
    • ±1.5% accuracy (TA = -55°C, 125°C)
  • Voltage offset: 10µV (typical), V+ = 12V
  • Adjustable gain with a single resistor
  • Operating temperature range: -55°C to +125°C
  • Passes NASA low outgassing specifications
  • 14 Ld TSSOP with NiPdAu-Ag lead finish
  • TID Radiation Lot Acceptance Testing (RLAT) (LDR: ≤ 10mrad(Si)/s)
    • ISL70100M30VZ: 30krad(Si)
    • ISL70100M50VZ: 50krad(Si)
  • SEE Characterization
    • No DSEE with RS+ = 42V and V+ = 42V at 43MeV•cm2/mg
    • SET ≤ 2.31E-3cm2 at 43MeV•cm2/mg
    • SEFI < 10μm2 at 43MeV•cm2/mg

Documentation

Featured Documentation
Datasheet
ISL70100M Datasheet
PDF 1.31 MB
Application Note
Key Circuits in Sensor Signal Conditioning Application Note
PDF 617 KB
White Paper
Wafer by Wafer Low Dose Rate Acceptance White Paper
PDF 533 KB
Application Note
AN9867: End of Life Derating: A Necessity or Overkill
PDF 338 KB
Application Note
AN9654: Use of Life Tested Parts
PDF 224 KB
5 items

Design & Development

ISL70100MVZEV1Z Evaluation Board - Top
Evaluation
ISL70100MEV1Z Active

Radiation Tolerant 40V Current Sense Amplifier Evaluation Board

The ISL70100MEV1Z evaluation board is used to evaluate the performance of the ISL70100M radiation tolerant 40V current sense amplifier.

Built using the Renesas proprietary PR40 Silicon-on-Insulator (SOI) process, the ISL70100M is a transconductance amplifier that monitors current using an...

Recommended Documents:
ISL70100MEV1Z Evaluation Board Manual
Order Now
ISLRTPFDEMO1Z Reference Design Board
Reference Designs
ISLRTPFDEMO1Z

Power Management Reference Design for Microchip RT PolarFire FPGA Family

The ISLRTPFDEMO1Z is a comprehensive power management reference design tailored to meet the needs of the Microchip radiation tolerant (RT) PolarFire® SoC FPGA family. The PolarFire SoC system requires various supply rails, each with its own specific DC and AC regulation tolerances and...

Recommended Documents:
ISLRTPFDEMO1Z Design Files
ISLRTPFDEMO1Z Demonstration Board Manual
Order Now

ECAD Models

Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.

Explore ECAD Models
Diagram of ECAD Models

Product Options

Applied Filters:

Support

Support Communities

Support Communities

Get quick technical support online from Renesas Engineering Community technical staff.
Get Support
Browse FAQs

FAQs

Browse our knowledge base of common questions and answers.
Browse FAQs
Submit a Ticket

Submit a Ticket

Need to ask a technical question or share confidential information?
Submit Ticket

Resources

FAQs

  1. Can the Hi-Rel Current Sense Amplifiers be Used for Both High-Side and Low-Side Sensing Configurations?

    Yes. They can be used for both high or low-side sensing. There are two internal amplifiers and a common mode range detector. When the common mode voltage is below 1.7V the low-side amplifier is used to sense current and when the common mode voltage is above 1 ...

    Jul 11, 2025
  2. Can the Hi-Rel Current Sense Amplifiers Sense Current Across a Fuse?

    Yes. The absolute maximum differential voltage across the RS+ and RS- pins must be limited to 42V when the fuse is in an open state. Suitable Products ISL70100M, ISL70100SEH, ISL73100SEH

    Jul 11, 2025
  3. Can the Hi-Rel Current Sense Amplifiers Sense Current Bidirectionally?

    The current can only be sensed in the positive direction, i.e. current flowing from RS+ to RS- pins.

    Jul 11, 2025