Overview
Description
The IPS2200 is an industrial-qualified, inductive position sensor IC capable of providing the absolute rotor position as sine and cosine. This IC uses the physical principle of Eddy currents to detect the position of a simple metallic target moving above a set of coils, consisting of one transmitter and two receivers. The output interface can be configured as single-ended, for higher system cost effectiveness or differential to better reject common mode disturbers. The IPS2200 can be used for high-speed motor commutation up to 250krpm electrical, in industrial, medical, robotic, and consumer applications.
Stray filed immunity, lower weight, smaller size, and a substantial BOM optimization make the IPS2200 the key element of the Resolver 4.0, a disruptive solution.
Features
- Interface: sin/cos single-ended or differential
- Qualified for Industrial market
- Temperature range: -40 °C to 125 °C ambient
- Voltage Supply: 3.3V ±10% or 5.0V ±10%
- Rotational Speed: up to 250.000 rpm (electrical)
- Propagation delay: programmable; < 10µs
- Sin/Cos gain mismatch and offset compensation
- Overvoltage, reverse polarity, short-circuit protected
- Digital programming interface: I²C or SPI
- AB incremental pulse outputs
- 16-TSSOP package
Comparison
Applications
Design & Development
Software & Tools
Boards & Kits
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Support Communities
-
testing IPS2200
Hello all, I am a programmer trying to dabble in electronics. I got a junior PCB designer to put an IPS2200 and the generated wire pattern together with an MCU and a motor driver. Some testing and consults later I discovered some big issues with the designer's work. For ...
Oct 14, 2022 -
IPS2200 RA4E1 I2C arbitration error
Hi, Our setup consists of 2 IPS2200 ICs connected to an RA4E1 microcontroller. Each IPS220 uses its own I2C slave address. Reading from the IPS2200 sometimes triggers an arbitration error on the RA4E1 master. I noticed that the IPS2200 briefly releases the data line after the acknowledge bit following the ...
Nov 12, 2022 -
IPS2200 sample code
Dear, Could you let me get a sample code working on Renesas MCU? If you have, I want to get it for RA & RX MCU. Thank you.
Jan 27, 2023