Renesas Electronics Corporation
Search

8523

Obsolete

Low Skew,1-to-4 Differential-to-HSTL Fanout Buffer

NOTICE - The following device(s) are recommended alternatives:
8SLVP1204 - 2:4 LVPECL Output Fanout Buffer

Overview

The 8523 is a low skew, high performance 1-to-4 Differential-to-HSTL Fanout Buffer. The 8523 has two selectable clock inputs. The CLK, nCLK pair can accept most standard differential input levels. The PCLK, nPCLK pair can accept LVPECL, CML, or SSTL input levels. The clock enable is internally synchronized to eliminate runt pulses on the outputs during asynchronous assertion/deassertion of the clock enable pin. Guaranteed output and part-to-part skew characteristics make the 8523 ideal for those applications demanding well defined performance and repeatability.

8523 - Block Diagram
8523 - Pinout
8523 - Block Diagram
8523 - Pinout
  • Four differential output HSTL compatible outputs
  • Selectable differential CLK, nCLK or LVPECL clock inputs
  • CLK, nCLK pair can accept the following differential input levels: LVPECL, LVDS, HSTL, HCSL, SSTL
  • PCLK, nPCLK pair can accept the following differential input levels: LVPECL, CML, SSTL
  • Maximum output frequency: 650MHz
  • Translates any single-ended input signal to HSTL levels with resistor bias on nCLK input
  • Additive phase jitter, RMS: 0.082ps (typical), 100MHz fOUT
  • Additive phase jitter, RMS: 0.190ps (typical), 120MHz fOUT
  • Output skew: 30ps (maximum)
  • Part-to-part skew: 200ps (maximum)
  • 3.3V core, 1.8V output operating supply
  • 0°C to 70°C ambient operating temperature
  • Available in lead-free (RoHS 6) packages

Documentation

Design & Development

ECAD Models

Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.

Explore ECAD Models
Diagram of ECAD Models

Models
Type Title Date
Model - IBIS
8523 IBIS Model
ZIP 7 KB
1 item

Product Options

Applied Filters:

Support

Support Communities

Support Communities

Get quick technical support online from Renesas Engineering Community technical staff.
Get Support
Browse FAQs

FAQs

Browse our knowledge base of common questions and answers.
Browse FAQs
Submit a Ticket

Submit a Ticket

Need to ask a technical question or share confidential information?
Submit Ticket

Support Communities

  1. External processor interfacing with DA14531 over UART using GTL

    Hello, We are using external MCU to communicate and control DA14531 through UART using the GTL protocol. We have an external processor as STM32. We are not able to find any documentation related to external processor interfacing DA14531 overt UART using GTL. They have mentioned "The two components will communicate ...

    Apr 29, 2020
  2. width pulse in counter

    Dear  I am using the SLG46620 device and the CNT components as counters, I would like to know if the width of the geerated set can be changed or is it by default. Attached image. Another question regarding this would be if it is possible to generate a pulse half ...

    May 4, 2020
  3. Salvator-X ES1 Kernel booting hang at "Starting kernel ..."

    ... ########################[ 52.852311] ######################## ...

    Jul 30, 2019
View All Results from Support Communities (9)