Features
- 10 ns read/write cycle time
- Read and Write Clocks can be asynchronous or coincidental
- Dual-Ported zero fall-through time architecture
- Empty and Full flags signal FIFO status
- Almost-Empty and Almost-Full flags set to Empty+7 and Full-7, respectively
- Output enable puts output data bus in high-impedance state
- Available in 28-pin 300 mil plastic DIP
- Industrial temperature range (–40C to +85C) is available
Description
The 72210 is a 512 x 8 SyncFIFO™ with clocked read and write controls. This FIFO is useful for a wide variety of data buffering needs, such as graphics, Local Area Networks (LANs), and interprocessor communication. It has 8-bit input and output ports. The Read Clock can be tied to the Write Clock for single clock operation or the two clocks can run asynchronous of one another for dual clock operation.
Support Communities
-
Android 10 can't booting
Dear All, I am following guideline: https://elinux.org/R-Car/Boards/Kingfisher/Android/Android_10 after Flashing images, android hang logo Log boot: [ 0.000154] NOTICE: BL2: R-Car H3/M3/M3N Initial Program Loader(CA57) [ 0.005199] NOTICE: BL2 ...
Jun 7, 2023 -
Observer scan only one channel
Hi, I have two devices. One broadcaster and one observer. The problem is that the observer seems scan only one channel (37). If I set the broadcaster to advert on 38 or/and 39, the observer doesn't receive any reports. In the same time, my android table receive ...
Dec 10, 2016
Support Communities
