Features
- 8-pin SOIC package, Pb free
- Available in RoHS compliant package
- IDT's lowest cost clock divider
- Low skew (500 ps) outputs. One is /2 of the other
- Easy to use with other generators and buffers
- Input clock frequency up to 156 MHz
- Output clock duty cycle of 45/55
- Power-down turns off chip
- Output Enable
- Advanced, low-power CMOS process
- Operating voltage of 3.3 V or 5 V
- Does not degrade phase noise - no PLL
- Available in industrial and commercial temperature ranges
Description
The 542 is cost effective way to produce a high-quality clock output divided from a clock input. The chip accepts a clock input up to 156 MHz at 3.3 V and produces a divide by 2, 4, 6, 8, 12, or 16 of the input clock. There are two outputs on the chip, one being a low-skew divide by two of the other. For instance, if an 100 MHz input clock is used, the 542 can produce low-skew 50 MHz and 25 MHz clocks, or low skew 25 MHz and 12.5 MHz clocks. The chip has an all-chip power-down mode that stops the outputs low, and an OE pin that tri-states the outputs. See the 501, 502, 511, 512, and 525 for clock multipliers.
Support Communities
-
Recommendation or direct replacement for the 542MLFT
We have an old design that used the 542MLFT and I see that this device is obsolete.What do you recommend we use to replace this on new designs? [locked by: Sai (SWF) at 13:33 (GMT 0) on 16 Jun 2022]
May 11, 2022 -
DA14531 GTL not sending GAPC_PARAM_UPDATE_REQ_IND or GATTC_MTU_CHANGED_IND
I'm using the GTL specification document as a reference for implementing a GTL host application. When I try connecting to the DA1453 from the nRF Connect app on android, I receive the GAPC_CONNECTION_REQ_IND message just fine, and when sending the confirmation message, the app is able ...
May 15, 2025 -
Connect manual RH850 r7f7p15223
Hello friends. Please help a newbie)) I want to find a manual on connecting to rh850 microcontrollers, where can I find them, maybe in c+ or e2 studio?
May 16, 2025
Support Communities
