Skip to main content
Renesas Electronics Corporation

Renesas’ Timing product portfolio has been acquired by SiTime.

Datasheets, documentation, and sample orders remain available on Renesas.com through late 2026. For new designs, purchasing, support, and product inquiries, visit SiTime.com or send an email to SalesClocks@sitime.com. Full transition to SiTime is expected by late 2026.

Features

  • Packaged as 8-pin SOIC or die
  • Pb (lead) free package
  • IDT's lowest cost PLL clock
  • Zero ppm multiplication error
  • Easy to cascade with 5xx series
  • Input crystal frequency of 5 - 27 MHz
  • Input clock frequency of 2 - 50 MHz
  • Output clock frequencies up to 190 MHz
  • Low jitter - 50 ps one sigma
  • Compatible with all popular CPUs
  • Duty cycle of 45/55 up to 160 MHz
  • Operating voltages of 3.0 to 5.5 V
  • 25 mA drive capability at TTL levels
  • Industrial temperature version available
  • Advanced, low-power CMOS process

Description

The 502 Loco™ is the most cost effective way to generate a high-quality, high-frequency clock output and a reference from a lower frequency crystal or clock input. The name LOCO stands for Low Cost Oscillator, as it is designed to replace crystal oscillators in most electronic systems. Using Phase-Locked Loop (PLL) techniques, the device uses a standard fundamental mode, inexpensive crystal to produce output clocks up to 160 MHz. Stored in the chip's ROM is the ability to generate six different multiplication factors, allowing one chip to output many common frequencies (see table on page 2). This product is intended for clock generation. It has low output jitter (variation in the output period), but input to output skew and jitter are not defined or guaranteed. For applications which require defined input to output skew, use the 570B.
Part NumberStatusSamplesStockPackageLead Count (#)Carrier TypeMoisture Sensitivity Level (MSL)Output Freq Range (MHz)Qty. per Reel (#)Qty. per Carrier (#)Pb (Lead) FreePb Free CategoryTemp. Range (°C)
502MILFObsoleteN/AOut of StockSOIC8#Tube114 - 120097#Yese3 Sn-40 to 85°C
502MILFTObsoleteN/AOut of StockSOIC8#Reel114 - 1203000#0Yese3 Sn-40 to 85°C
502MLFObsoleteN/AOut of StockSOIC8#Tube114 - 160097#Yese3 Sn0 to 70°C
502MLFTObsoleteN/AOut of StockSOIC8#Reel114 - 1603000#0Yese3 Sn0 to 70°C

Support Communities

  1. DA14531 is sending "+++" for every 2 seconds if I close the Renesas smart console APP in the middle

    Hi, I enabled the "CFG_ENTER_BINARY_MODE_ON_CONNECTION" in DA14531 sdk. I have interfaced Renesas RX111 microcontroller with DA14531 through UART (only rx & tx) and I'm using codeless sdk. I want to send data from APP to RX111 microcontroller through DA14531 and vice versa. first I ...

    Sep 5, 2024
  2. Wifi Demo

    i am using RA6M3 can anyone please guide me to connect the esp32-c6 wifi module to the ra6m3 board and connect with other device and transfer data This thread was automatically locked due to age.

    Sep 5, 2024
  3. RH850F1KM-S1 / AD Converter Characteristics SPEC.

    Hello. If you look at the UM manual of RH850F1KM-S1 MCU,As you can see in the captured photo below,The difference between the Min/Max range of the sampling and conversion times in the A/D electrical specifications is written as being quite large. The customer ...

    Sep 5, 2024
View All Results from Support Communities (129)
Support Communities

Support Communities

Get quick technical support online from Renesas Engineering Community technical staff.
Browse Articles

Knowledge Base

Browse our knowledge base for helpful articles, FAQs, and other useful resources.
Submit a Ticket

Submit a Ticket

Need to ask a technical question or share confidential information?