Features
- Packaged as 20-pin TSSOP – Pb-free, RoHS compliant
- Eight addressable registers
- Replaces multiple crystals and oscillators
- Output frequencies up to 200 MHz at 3.3 V
- Configurable Spread Spectrum Modulation
- Input crystal frequency of 5 to 27 MHz
- Clock input frequency of 3 to 166 MHz
- Up to six reference outputs
- Separate 1.8 to 3.3 V VDDO output level controls for each bank of 3 outputs
- Up to two sets of three low-skew outputs
- Operating voltages of 3.3 V
- Controllable output drive levels
- Advanced, low-power CMOS process
Description
The 291 field programmable spread spectrum clock synthesizer generates up to six high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency crystal input. It is designed to replace crystals, crystal oscillators and stand alone spread spectrum devices in most electronic systems. Using IDT's VersaClockTM software to configure PLLs and outputs, the 291 contains a One-Time Programmable (OTP) ROM for field programmability. Programming features include input/output frequencies, spread spectrum amount, eight selectable configuration registers and up to two sets of three low-skew outputs. Each of the two output groups are powered by a separate VDDO voltage. VDDO may vary from 1.8 V to VDD. Using Phase-Locked Loop (PLL) techniques, the device runs from a standard fundamental mode, inexpensive crystal, or clock. It can replace multiple crystals and oscillators, saving board space and cost. The 291 is also available in factory programmed custom versions for high-volume applications.
Support Communities
-
Synergy™︎ MCU
Support Forum for Synergy Products
-
No one answers the question....
Hello Renesas I have used various channels to get an answer to my questions, but I have not received an answer from Renesas. - opened a support ticket (ticket number: 360431).- called Renesas (Munich).- made a request via Mouser.- wrote an e-mail to [email protected]From my point of view ...
Nov 14, 2022 -
DA14531 MOD UART receive interrupt crashes CPU
Hi, I am stumped, I don't know what I changed. I had things working fine and then one day I woke up and for some reason UART RX interrupts started crashing the CPU (PC off in the weeds). The crash happens when I call this function:uart_receive(UART2 ...
Nov 14, 2022
Support Communities
