Features
- Clock outputs from 10 to 133 MHz
- Zero input-output delay
- Four low skew (<250 ps) outputs
- Device-to-device skew <700 ps
- Full CMOS outputs with 25 mA output drive capability at TTL levels
- 5 V tolerant CLKIN
- Tri-state mode for board-level testing
- Advanced, low power, sub-micron CMOS process
- Operating voltage of 3.3 V
- Industrial temperature range available
- Packaged in 8-pin SOIC
Description
The 2305 is a low phase noise, high-speed PLL based, low-skew zero delay buffer. Based on IDT's proprietary low jitter Phase Locked Loop (PLL) techniques, the device provides four low skew outputs at speeds up to 133 MHz at 3.3 V. The outputs can be generated from the PLL (for zero delay), or directly from the input (for testing), and can be set to tri-state mode or to stop at a low level. The PLL feedback is on-chip and is obtained from the CLKOUT pad. The 2305 is available in two different versions. The 2305-1 is the base part. The 2305-1H is a high drive version with faster rise and fall times.
Parameters
| Attributes | Value |
|---|---|
| Temp. Range (°C) | -40 to 85°C, 0 to 70°C |
| Product Category | Zero Delay Buffers |
Package Options
| Pkg. Type | Pkg. Dimensions (mm) | Lead Count (#) | Pitch (mm) |
|---|---|---|---|
| SOIC | 4.9 x 3.9 x 1.5 | 8 | 1.27 |
Support Communities
-
What's the meaning of symbol * in this code?
#define SYSTEM (*(volatile struct st_system __evenaccess *)0x80000)Hello everyone,Is there anyone can help me to understanding what's the meaning of the symbol * that I marked with red in code? "st_system" was declared as a structure somewhere, so "__evenaccess" is a structures variable.It seems that ...
Oct 9, 2011 -
DA14585 - voltage input and max voltage for Xtal
Hello DA14585 questions; How can we connect the voltage input with a 3.3v supply? With the external clock source, what is the maximum voltage we can supply into XTAL 16Mp? The data sheet only references a typ of 1.2V. What is the maximum? Regards, Manuel
May 16, 2019 -
:/DA1468x_DA15xxx_SDK_1.0.14.1081/sdk/bsp/startup/startup_ARMCM0.S:38:2: error: #warning "Building Production image with MAGIC V
I am building my project but i am getting this error. I can't understand the meaning of this. Can someone explain it to me what i did wrong. :/DA1468x_DA15xxx_SDK_1.0.14.1081/sdk/bsp/startup/startup_ARMCM0.S:38:2: error ...
May 15, 2019
Support Communities
