Renesas' programmable crystal oscillators (XOs) are designed for the ultimate flexibility, short lead time, and minimizing non-recurring engineering effort. Our XO families offer low jitter clock sources, featuring typical RMS phase jitter down to 120fs, programmable frequency up to 2.1GHz, and support different levels of performance, output types, stabilities, input voltages, packages, pin configurations, and temperature grades.

Renesas's crystal oscillators are offered in various frequencies, levels of performance, output types, stability, input voltage, package, pin configuration, and temperature grade. Use the form below to configure a device to meet your specific needs.

Submit by Part Number

Users who wish to submit a request and generate a datasheet addendum based on a part number, may do so here. The part number must be a valid and already existing part number. If the part number being requested does not yet exist, then users will need to fill out the General Configuration Form in order to create it. An entry here will override the selections in the General Configuration. Leave this field blank to use the selections.

OR: General Configuration & New Frequency Request

Jitter Typical jitter performance, integrated over the 12 kHz to 20 MHz range.

Package Device package defined by nominal width and length dimensions.

Output Type The output signal type.

Voltage Power supply voltage for the crystal oscillator.

Frequency (MHz) The fixed output frequency in MHz.

Min:0.016
Max:1500

OE Position Determines the physical position of the output Enable/Disable (E/D) pin.

Stability Total stability of the device, expressed in parts-per-million.

Temperature Determines the temperature grade of the device.

Project Information

Comments / Special Requests

By submitting this form, you agree Renesas may share all or part of the above information, data and/or documents submitted by you within the Renesas group and third parties, such as distributors, for the purpose providing you with further information and service related to our products. If you do not want Renesas to share your information, do not click the submission button. Please see our Privacy Policy for further details.

ProXO Field Programmable Clock Oscillators

The Renesas ProXO series, including the XT/XP/XF families of devices, are designed for data centers, optical and wireline communication networks, and industrial level equipment that demand very low noise, stable, and accurate clock sources. Typical phase jitter is 120fs over 12kHz to 20MHz bandwidth. The devices are available in a wide frequency range from 15MHz to 2100MHz with package sizes down to 2.0mm x 2.5mm.

The XP/XF family have stabilities as tight as ±25ppm for -40 °C to +85 °C and ±50ppm for -40 °C to +105 °C. For even tighter stability, we recommend the XT family; with integrated TCXO technology, XT offers ±3ppm for -40 °C to +85 °C. Short lead-time, low noise, wide frequency range, excellent ambient performance, and very little engineering effort to incorporate this into your design makes the XT/XF/XP devices an excellent choice over other technologies.

XL, XA (Automotive) and XU High-performance Clock Oscillators

The Renesas XL, XA (conforms to AEC-Q200) and XU crystal oscillators are available in HCMOS, LVPECL, LVDS, and HCSL outputs. The XU and XL/XA families have 300fs and 750fs typ. RMS phase jitter (12kHz – 20MHz), respectively. Devices are offered with frequency stability options of ± 20ppm, ± 25ppm, ± 50ppm, or ± 100ppm and fast lead times for custom frequencies from 16kHz to 1.5GHz. These products feature industry-standard packages (3.2mm x 2.5mm, 5mm x 3.2mm, 7mm x 5mm) and pin-outs. These products have the performance, price and delivery to meet your design requirements. Applications include networking, vision system, infotainment, communications, data I/O, storage, and servers.

Low-noise, Low-Power Crystal Oscillators

Renesas crystal oscillator devices are low-power crystal oscillators that can be used in standard 5mm x 7mm quartz oscillator footprints. The phase noise performance of the Renesas crystal oscillators enables their use as reference clocks for phase-noise sensitive applications. The low-power oscillators are ideal for clock generation where low phase-noise reference clocks improve transmission distance or reduce bit error rates and conversion errors of data transmission lines. Additional examples of application uses can be found in wireless infrastructure radio and base-band processing units, high-speed SerDes clocking (for instance S-RIO 1.3 and 2.1), PCI Express® Generation 1, 2 and 3, various Ethernet interfaces (Gigabit Ethernet, XAUI and 10Gbit Ethernet), optical interfaces in SDH/SONET applications (OC-12, OC-48 and OC-192) and in driving DAC/ADC devices in instrumentation applications.

Key Selection Criteria for Quartz Oscillator ICs

While physical footprints have tended to standardize, quartz oscillator ICs offer various features and levels of performance. Key attributes include:

  • Output type: this is the signaling type of the output that is required of the crystal oscillator circuit. Renesas offers CML, HCMOS, LVCMOS, HCSL, LVDS, and LVPECL.
  • Output frequency range: the valid range of output frequencies. Renesas offers quartz crystal oscillators to address the frequency needs of all popular applications.
  • Core voltage: the supply voltage used to power the device. This is typically defined by the power rails available in the system, and often has implications on voltage levels of the output. The Renesas low-power oscillators are offered in 1.8V, 2.5V and 3.3V options.
  • Phase jitter: defined as the undesired deviation from an ideal periodic timing signal. Renesas low-power oscillators offer typical RMS phase jitter down to 120fs integrated over 12kHz to 20MHz for high-performance applications.

About Crystal Oscillators and Crystal Oscillator Replacement

A crystal oscillator (or clock oscillator) uses the mechanical resonance of a vibrating crystal or piezoelectric material to create an electrical signal at a precise frequency. This frequency is commonly used to provide a stable clock signal for digital integrated circuits within a system. The most common type of piezoelectric resonator used is the quartz crystal. In general, a crystal oscillator circuit sustains oscillation by accepting a voltage signal from the resonator, amplifying it, and feeding it back to the resonator. When the energy of the generated output frequency matches the losses in the circuit, the oscillation can be sustained. Renesas offers thousands of timing products (such as quartz crystal oscillators/clock oscillators) to suit the needs of most applications.

Clocks & Timing

Product Selection Table

    Processing table
    Part Number
    Function
    Output Type
    Output Freq Range (MHz)
    Supply Voltage (V)
    Phase Jitter Max RMS (ps)
    Freq. Stability Total (± PPM)
    Temp. Range
    105°C Max. Case Temp.
    XA
    1000fs Automotive Quartz-based PLL Oscillator    		 XO HCMOS, LVDS, LVPECL 0.75 - 1350 2.5, 3.3 1 25, 50, 100 -40 to 85°C, -40 to 105°C, -40° to 105°C
    XF
    150fs Small Plastic Package Quartz-based PLL Oscillator    		 VCXO, XO CML, HCSL, LVDS, LVPECL 15 - 2100 1.8, 3.3, 2.5 0.15 25, 50 -40 to 85°C, -40 to 105°C
    XL
    1000fs Quartz-based PLL Oscillator    		 VCXO, XO HCMOS, LVDS, LVPECL 0.75 - 1350 2.5, 3.3 1 20, 25, 50, 100 -20° to 70°C, -40 to 85°C, -40° to 85°C, -40° to 105°C
    XP
    150fs Ceramic Package Quartz-based PLL Oscillator    		 XO CML, HCSL, LVDS, LVPECL 15 - 2100 1.8, 2.5, 3.3 0.15 25, 50 -40 to 85°C, -40 to 105°C
    XT
    150fs Small Plastic Package Quartz-based PLL Oscillator with Integrated TCXO    		 TCXO HCSL, LVDS, LVPECL 15 - 2100 1.8, 3.3 0.15 3 -40 to 85°C
    XU
    400fs Quartz-based PLL Oscillator    		 XO HCMOS, HCSL, LVDS, LVPECL 0.75 - 1350 3.3, 2.5, 1.8 0.4 20, 25, 50, 100 -20° to 70°C, -40° to 85°C, -40° to 105°C
    Parametric Table tips

    Tips for Using This Parametric Table:

    • Hide Filters button in header: Collapse or expands filters
    • Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
    • Reset button in header: Reset all filters to the page default
    • Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
    • Export button in header: Export the filtered results of the table to an Excel document
    • Filter parts search bar in header: Type to filter table results by part number
    • Hide column button in column headers: Select to hide columns in table
    • AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
    • Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
    • Document icon next to product name in row: View the featured document for this product
    • Chip icon next to the right of the document icon in row: View the block diagram for this product
    • Cart icon to the right of the chip icon: Indicates that samples are available for this product

    Documentation

    Title Type Date
    Fox XpressO to Renesas Part Number Cross Reference
    PDF7.95 MB
    Guide
    Timing Solutions Products Overview
    PDF872 KB
    Overview
    High-Performance Clock Oscillator Family Overview
    PDF580 KB
    Overview
    ProXO+ High Accuracy, High Frequency Differential Oscillators Overview

    Learn about the ProXO+ differential clock portfolio featuring ±3ppm frequency stability and phase jitter performance as low as 135fs at up to 2.1GHz frequencies. Programmability enables customers to customize the devices quickly and easily, in addition to reducing non-recurring engineering (NRE) costs. A compact 3.2mm x 2.5mm plastic package simplifies the bill of materials (BOM), lowering BOM costs, and offers more supply chain flexibility.

    Video List
    ProXO+ High Accuracy, High Frequency Differential Oscillators Overview
    Overview and Demo of XF and XP Family of Field-Programmable Clock Oscillators

    News & Blog Posts

    Renesas Expands ProXO Oscillator Portfolio for High-Performance Communications, and Data Center Applications News Sep 2, 2021
    IDT Launches ProXO Family of Programmable Low Jitter Clock Oscillators for Datacenter and Networking Applications News May 14, 2019