Overview

Description

The 5X2503 MicroClock is a programmable clock generator, and is intended for low power, consumer, wearable and smart devices. The 5X2503 device is a 3 PLL architecture design with an embedded 26MHz crystal. Each PLL is individually programmable, allowing for up to 3 unique frequency outputs. The 5X2503 has built-in unique features such as Proactive Power Saving (PPS) to deliver better system level power management.

An internal OTP memory allows the user to store the configuration in the device without programming after power up, and then can be reprogrammed again through the I²C interface. The device has programmable VCO and PLL source selection allowing the user to do power-performance optimization based on the application requirements. A low power 32.768kHz clock is supported with only less than 2μA current consumption for system RTC reference clock needs.

Features

  • Configurable OE pin function as OE, PPS or DFC control function
  • PPS: Proactive Power Saving features save power during the end device power-down mode
  • DFC: Dynamic Frequency Control feature allows programming up to 4 difference frequencies that switch dynamically
  • Spread Spectrum clock support to lower system EMI
  • I²C Interface
  • Supported by IDT Timing Commander™  software tool

Comparison

5X2503 5L2503
Input Type Crystal (integrated) Crystal, LVCMOS
Inputs (#) 1 1
Outputs (#) 3 3
Output Type LVCMOS LVCMOS
View Product

Documentation

Type
Date
PDF 573 KB Datasheet
PDF 187 KB Application Note
PDF 348 KB Application Note
PDF 1023 KB Overview
PDF 307 KB Application Note
PDF 495 KB Application Note
PDF 565 KB Application Note
PDF 438 KB Application Note
8 items

Design & Development

Software & Tools

Software Downloads

Type Date
ZIP 18.02 MB Software & Tools - Other
ZIP 8.19 MB Software & Tools - Other
2 items

Boards & Kits

Boards & Kits

Models

Support

MicroClock™ Clock Generator Family Overview

Brief overview of the MicroClock™ family of tiny, flexible clock generators designed for wearable, hearable and IoT applications.