Overview
Description
The ADC1002S020 is a 10-bit high-speed Analog-to-Digital Converter (ADC) for professional video and other applications. It converts with 3.0 V to 5.25 V operation the analog input signal into 10-bit binary-coded digital words at a maximum sampling rate of 20 MHz. All digital inputs and outputs are CMOS compatible. A standby mode allows a reduction of the device power consumption to 4 mW.
Features
- 10-bit resolution
- 3.0 V to 5.25 V operation
- CMOS/Transistor-Transistor Logic (TTL) compatible digital inputs and outputs
- DC sampling allowed
- External reference voltage regulator
- High signal-to-noise ratio over a large analog input frequency range (9.3 effective
- bits at 1.0 MHz
- full-scale input at fclk = 20 MHz)
- In-Range (IR) CMOS output
- Low analog input capacitance, no buffer amplifier required
- No sample-and-hold circuit required
- Power dissipation only 53 mW (typical value)
- Sampling rate up to 20 MHz
- Standby mode
Comparison
Applications
Documentation
Featured Documentation
Log in required to subscribe
|
|
|
|
|---|---|---|
| Type | Title | Date |
| Datasheet | PDF 420 KB | |
| End Of Life Notice | PDF 538 KB | |
2 items
|
||
Design & Development
Boards & Kits
Demonstration
ADC1002S020
Obsolete
ADC1002S020 demo board
Our ADC demo board is suitable for dynamic performance evaluations. A data-acquisition board can be used during design and prototype to analyze ADC performance.
Recommended Documents:
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Product Options
Applied Filters: