Overview
Description
The E30A Emulator is an on-chip debugging emulator that makes use of the debugging circuit NSD (New Single-wire Debugger), that is built in the R32C/100 Series MCUs. NSD is Renesas original OCD (On-chip Debugger).
Features
- OCD (On Chip Debugger) method
- No probing the MCU's foot pattern is necessary, and free from worry about degradation of a MCU signal.
- No dedicated evaluation chip or packaged components required to debug the user system.
- Newly-developed NSD method (Emulator connection method)
- Allows emulator to debug the user system just connecting it to one coaxial cable.
- A dedicated coaxial cable which comes with the product is 1.8 meters in length and is flexible.
- Learn more
Release Information
R32C/100 E30A Emulator debugger
Latest Ver.: V.1.02 Release 00
Released: Feb 21, 2011
Details of upgrade (See Tool News)
Target Devices
Downloads
|
|
|
|
|---|---|---|
| Type | Title | Date |
| Upgrade - IDE | High-performance Embedded Workshop V.4.09.01 Differential Update(From V.4.09.00)
|
|
| Upgrade - IDE | High-performance Embedded Workshop V.4.09.01 Full Update
|
|
| Upgrade - IDE | Renesas E-Series USB Driver V.1.02 Release 00
|
|
| Upgrade - Programmer | External Flash Definition Editor V.1.00 Release 01
|
|
| Upgrade - Debugger | R32C/100 E30A Emulator Debugger V.1.02 Release 00 Upgrade
|
|
5 items
|
||
Documentation
Log in required to subscribe
|
|
|
|
|---|---|---|
| Type | Title | Date |
| Manual - Development Tools | PDF 1.01 MB 日本語 | |
| Tool News - Notification | PDF 21 KB 日本語 | |
| Tool News - Note | PDF 204 KB 日本語 | |
| Tool News - Note | PDF 203 KB 日本語 | |
| Manual - Development Tools | PDF 2.54 MB 日本語 | |
| Release Note | PDF 91 KB 日本語 | |
| Tool News - Note | PDF 321 KB 日本語 | |
| Tool News - Note | PDF 203 KB 日本語 | |
| Tool News - Release | PDF 203 KB 日本語 | |
| Manual - Development Tools | PDF 3.51 MB 日本語 | |
| Release Note | PDF 209 KB 日本語 | |
| Tool News - Note | PDF 200 KB 日本語 | |
| Tool News - Release | PDF 314 KB 日本語 | |
| Tool News - Release | PDF 291 KB 日本語 | |
| Tool News - Release | PDF 195 KB 日本語 | |
| Application Note |
PDF
962 KB
AI-generated Summary:
The E30A emulator for the R32C/100 series supports trace and section time measurement functions by setting event access conditions in the High-performance Embedded Workshop (HEW). Trace events can monitor execution, branch, read, write, or read/write accesses, while section time measurement focuses on data access events only. Limitations exist, such as erroneous trace triggers due to instruction prefetch and inability to measure time based on function start/end. Corrective measures include embedding data access sequences and specifying data access conditions to ensure accurate tracing and timing.
|
|
| Tool News - Release | PDF 193 KB 日本語 | |
| Tool News - Release | PDF 196 KB 日本語 | |
| Tool News - Release | PDF 199 KB 日本語 | |
19 items
|
||
Additional Details
Specifications
| Item | Description | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Hardware break | ||||||||||||||||||
| Simultaneously usable functions by operation mode | Break | Trace | Execution Time | RAM Monitor | ||||||||||||||
| Execution Address | Data Access | Address Range | Data Comparison | |||||||||||||||
| Product part number | R0E00030AKCT00 (Discontinued product) | |||||||||||||||||
| Applicable MCU | M16C Family R32C/100 Series
| |||||||||||||||||
| Available MCU mode | Single-chip mode Memory expansion mode | |||||||||||||||||
| Max. operating frequency | 100MHz (CPU clock) | |||||||||||||||||
| Emulation memory | Not available (internal flash ROM used as emulation memory) | |||||||||||||||||
| Software break | Max. 256 points (implemented by instruction replacement) | |||||||||||||||||
| Execution Address break | Max. 8 points (execution address/ data access)
| |||||||||||||||||
| Combinatorial break point | OR/ status transition (in forward direction) | |||||||||||||||||
| Trace mode | Trace priority/ MCU execution priority specifiable | |||||||||||||||||
| Trace capacity | 8M events (Trace Priority)/ 512 events (MCU execution priority) | |||||||||||||||||
| Trace contents | Branch source and Branch destination/ conditional branch/ data access | |||||||||||||||||
| Trace event | Max. 8 points/ 4 areas (prefetch address/ data access)
| |||||||||||||||||
| Time measurement | Execution time (between Go-Stop, 32-bit CPU clock counter) Interval time 3 points (between data access, 40-bit counter) | |||||||||||||||||
| RAM monitor | Specifiable in byte or word unit
| |||||||||||||||||
| Coverage | Not available | |||||||||||||||||
| Trace | trace-priority | lens | lens | - | - | lens | - | - | ||||||||||
| MCU execution priority | lens | lens | - | lens | lens | - | - | |||||||||||
| Time measurement | lens | lens | - | - | - | lens | - | |||||||||||
| RAM monitor | lens | lens | lens | - | - | - | lens | |||||||||||
| Writer | - | - | - | - | - | - | - | |||||||||||
| Host machine I/F | USB 2.0（High Speed） | |||||||||||||||||
| Target I/F | 2-pin (50Ω coaxial cable) 3-pin (via coaxial converter board) 8-pin (via option board) | |||||||||||||||||
| Target I/F signal | NSDport, GND (When using coaxial cable/ coaxial converter board) NSDport, GND, Vcc1, Vcc2, RESET# (When using option board) | |||||||||||||||||
| Targetless debugging | Not available | |||||||||||||||||
| Emulator power supply | Supply power from a separately purchased AC adapter. For recommended specifications of the AC adapter, see the user’s manual for the E30A emulator. | |||||||||||||||||
| Target MCU power supply | Supplied from a user system | |||||||||||||||||
| Target host PC (OS) | Refer to Operating Environments of Products. | |||||||||||||||||
| Outside dimension (except the protruding part) | Width: 136.3mm, depth: 104.0mm, height: 36.8mm | |||||||||||||||||
| Weight | Approx. 300g | |||||||||||||||||
| Operating Environment | Temperature: 5ºC to 35ºC (No condensation) | |||||||||||||||||
| Storage Environment | Temperature: -10ºC to 60ºC (No condensation) | |||||||||||||||||
| Overseas standard | European Standards: EN 55022 Class A, EN 55024 US FCC Standard: FCC part 15 Class A | |||||||||||||||||
Note:lens Available | — Not Available
- When using E30A emulator with the device, please select the following MCU file name.
| Using device | Selecting MCU file | |
|---|---|---|
| MCU Group | Device name | |
| R32C/142 Group | R5F6442F | \McuFiles\R32C_145\R5F6445F_E30A.mcu |
| R32C/142 Group | R5F6442H | \McuFiles\R32C_145\R5F6445H_E30A.mcu |
Components
- E30A Emulator main unit
- USB I/F cable
- Target I/F cable
- Coaxial connector
- Coaxial converter board
- Connector for coaxial converter board
- Option I/F cable
- Option board
- Option board connector
- Software CD-ROM
- Integrated development environment High-performance Embedded Workshop
- R32C/100 E30A emulator debugger
- E30A emulator user's manual
System Configuration
Image
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Knowledge Base
Browse our knowledge base for helpful articles, FAQs, and other useful resources.
