Features
- Configurable OE pin function as OE, PPS, or DFC control function
- Proactive Power Saving (PPS) features save power during the end device power-down mode
- Dynamic Frequency Control (DFC) feature allows programming up to 4 different frequencies that switch dynamically
- Spread spectrum clock support to lower system EMI
- I²C Interface
- Supported by the Timing Commander™ software tool
Description
The 5L2503 MicroClock™ is a programmable clock generator intended for low-power, consumer, wearable, and smart devices. The 5L2503 device is a 3 PLL& architecture design. Each PLL is individually programmable, allowing for up to 3 unique frequency outputs. The 5L2503 has built-in unique features such as Proactive Power Saving (PPS) to deliver better system-level power management.
An internal OTP memory allows the user to store the configuration in the device without programming after power-up and then the device can be reprogrammed again through the I²C interface. The 5L2503 has programmable VCO and PLL source selection allowing the user to do power-performance optimization based on the application requirements. A low-power 32.768kHz clock is supported with only less than 2μA current consumption for system RTC reference clock needs.
Parameters
| Attributes | Value |
|---|---|
| Outputs (#) | 3 |
| Output Type | LVCMOS |
| Output Freq Range (MHz) | 0.032768 - 120 |
| Input Freq (MHz) | 1 - 120 |
| Inputs (#) | 1 |
| Input Type | Crystal, LVCMOS |
| Output Banks (#) | 1 |
| Core Voltage (V) | 1.8 |
| Output Voltage (V) | 1.8 |
| Product Category | MicroClock |
| Selection Criteria | <700 fs RM |
Package Options
| Pkg. Type | Pkg. Dimensions (mm) | Lead Count (#) | Pitch (mm) |
|---|---|---|---|
| VFQFPN | 2.5 x 2.5 x 0.55 | 12 | 0.4 |
Product Comparison
| 5L2503 | 5X2503 | |
| Input Type | Crystal, LVCMOS | Crystal (integrated) |
| Inputs (#) | 1 | 1 |
| Outputs (#) | 3 | 3 |
| Output Type | LVCMOS | LVCMOS |