メインコンテンツに移動

概要

説明

The ISL73847M is a synchronous buck controller that can operate as a single or dual-phase controller. It works with the ISL71441M (half-bridge GaN FET driver) to generate point-of-load voltage rails for commercial space applications.

It accepts an input voltage range of 4.5V to 19V with a programmable PWM output switching frequency between 250kHz and 1.5MHz with a single resistor. The output can regulate a voltage upwards of 600mV and is limited on the top end by the minimum off time and selected switching frequency.

The wide input voltage range makes it a suitable power supply option for a high-current FPGA core and other general-purpose power solutions. The ISL73847M uses current mode modulation, which simplifies loop compensation and provides excellent power supply rejection. Additionally, the output is remotely sensed to compensate for any voltage drop in the load conditions. Together, this results in a robust power supply solution that requires minimal components while achieving high current density.

特長

  • Qualified to Renesas Rad Tolerant Screening and QCI Flow (R34TB0004EU)
  • Wide operating voltage range:
    • Input: 4.5V to 19V
    • Output: 0.6V to V PWR_STAGE ×((TSW -120ns)/TSW)
  • Programmable PWM output switching frequency
    • 250kHz to 1.5MHz
  • Optional droop regulation
  • Current mode control provides
    • Excellent power supply rejection
    • Simplified control scheme
  • Output differential remote sensing
  • Programmable soft-start
  • Enable control
  • Power-good Indicator
  • TID Radiation Lot Acceptance Testing (LDR: ≤0.01rad(Si)/s)
    • ISL73847M30BZ: 30krad(Si)
    • ISL73847M50BZ: 50krad(Si)
  • SEE Characterization
    • No DSEE with VDD = 25V and 43MeV•cm2/mg
    • SEFI <3μm2 at 43MeV•cm2/mg
    • SET <2% on VOUT at 43MeV•cm2/mg

製品比較

アプリケーション

ドキュメント

分類 タイトル 日時
データシート PDF 2.57 MB
アプリケーションノート PDF 391 KB
アプリケーションノート PDF 351 KB
技術概要 PDF 356 KB
アプリケーションノート PDF 224 KB
5件

設計・開発

ソフトウェア/ツール

ソフトウェア/ツール

Software title
Software type
会社名
iSim:PEオフラインシミュレーションツール
iSim Personal Edition(iSim:PE)は、プロジェクトの早い段階で設計サイクルを速め、プロジェクト初期のリスクを低減し、現在のみならず次世代の設計に耐えうる部品を選定します。
Simulator ルネサス
1件

ソフトウェアダウンロード

分類 タイトル 日時
ソフトウェア/ツール-その他 XLSX 306 KB
ソフトウェア/ツール-その他 XLSX 338 KB
ソフトウェア/ツール-その他 XLSX 742 KB
3件

ボード&キット

モデル

ECADモデル

SamacSysの回路図シンボル、PCBフットプリント、および3D CADモデルは、製品オプションテーブルのCADモデルリンクをクリックすることで参照できます。シンボルまたはモデルが対応していない場合は、SamacSysに直接リクエスト可能です。

Diagram of ECAD Models

モデル

分類 タイトル 日時
モデル-その他 ログインしてダウンロード ZIP 157 KB
モデル-SPICE ログインしてダウンロード ZIP 259 KB
モデル-iSim ログインしてダウンロード ZIP 296 KB
3件

製品選択

適用されたフィルター