Overview
Description
The PROFINET IO Device Chip TPS-1 reduces the time and cost efforts for implementing to a minimum and provides device manufacturers with a fast, easy and cost-saving integration of a PROFINET IO device interface.
Renesas Electronics, a leading provider of ultra-modern semiconductor solutions, and Phoenix Contact enter into a strategic partnership. Both companies work together in marketing and distributing the PROFINET IO Device Chip TPS-1 developed both by Phoenix Contact and Siemens. The TPS-1 Chip will be available together with the ERTEC 200/400 PROFINET controllers developed by Siemens through worldwide sales channels of Renesas Electronics.
Within the scope of the planned collaboration, Renesas Electronics builds worldwide distribution and customer support for the PROFINET Device Chip TPS-1 via its distribution network. Phoenix Contact will be responsible for the maintenance and further development of the software components associated with the TPS-1 PROFINET Chip and provide support in answering system-related questions regarding PROFINET and the realization of special customer-specific solutions.
Features
- PROFINET stack, CPU, RAM and PHYs integrated
- Internal 3-Port IRT Switch with 8 priority levels
- Parallel and serial host interface
- PROFINET version 2.3 for RT and IRT
- BGA housing 15 x 15 mm² with 1 mm pitch for inexpensive PCBs
- Approx. 800 mW power dissipation
- Required area: 260 mm² for the complete interface (RJ45)
Comparison
Applications
Design & Development
Software & Tools
Sample Code
Boards & Kits
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Support Communities
-
TPS-1 -How to disable Port mirroring
... 1 has been configured for port mirroring. Is there a way to disable it if someone doesn't want port mirroring ? Can port mirroring in TPS-1 be disabled by HOST CPU through SPI at run time or by configuring TPS-1 during flashing of TPS-1 stack? Or is ...
Jan 24, 2018 -
Profinet TPS-1 related
can any one help me how i can use Profinet TPS-1 on DK S7G2 board?
Jan 21, 2020 -
Driver for Profinet TPS-1
Hello, are there any plans to adding support for TPS-1 into SSP in the future? Best regards Robert
Dec 17, 2017
FAQs
-
TPS-1 PROFINET V2.3 Redundancy or MRP
PROFINET V2.3 redundancy is the same as Media Redundancy Protocol (MRP). Therefore, yes, TPS-1 supports PROFINET V2.3 redundancy, otherwise known as MRP.
Jun 2, 2017 -
TPS-1 API Compiler Independence
The API code was created to use ANSI C code to make the API as compiler independent as possible.
Jun 2, 2017 -
TPS-1 WD_IN in Parallel IO Mode
No, in this case you should connect the WD_IN pin with a pull-down resistor (10k) to GND. It is only used in host mode (parallel or serial).
Jun 1, 2017