Overview
Description
The RX62T Group of high-performance microcontrollers with a maximum operating frequency of 100MHz are designed for motor control. They are equipped with multifunction timers (MTU, GPT), high-speed 12-bit A/D converter, and 10-bit A/D converter for facilitating motor control. The products also incorporate many safety features to comply with the IEC60730 safety standard for home appliances. In addition to a maximum of 256KB flash and 16KB RAM on-chip memory, they have a maximum of 32KB of on-chip flash memory for data storage. 64-pin to 112-pin packages are available.
Comparison
Applications
Design & Development
Software & Tools
Software Downloads
Sample Code
Boards & Kits
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Support Communities
-
LIN bus on RX62T
... include a LIN Bus master on our hardware. Is their an application sheet with sample code for the RX62T available or for any other RX6xx v1CPU with LIN module, which we can you as a start project? Couldn't find anything in the application section of RX62T Kind regards Reinhard
Dec 7, 2018 -
RX62T BOOTLOADER
Hi everybody, I need a serial bootloader for the RX62T family but I can't find a ready to use code, anyone can help me? Thank's Claudio
Apr 14, 2017 -
Configure operating frequency for RX62T
Hello All,Please help me by providing basic initialisation (Register settings) ,to start up with RX62T (100 pin) .Am using a 12Mhz crystal.Kind RegardsPrathap C Nair
Jan 7, 2012
FAQs
-
(RX62T, RX610, RX62G, RX63T) What types of resonator can be connected and what can you recommend?
A crystal resonator can be used for the main clock oscillator. There are no particular resonators that we recommend.
Jun 20, 2013 -
(RX62T, RX62G) I can't enter all-module stop mode.
To enter all-module stop more, execute a WAIT instruction after setting the related registers or bits as follows. - MSTPCRA.ACSE bit = 1 (all-module clock stop mode is enabled) - SBYCR.SSBY bit = 0 (shifts to sleep mode or all-module clock stop mode after the WAIT instruction is executed ...
May 27, 2013 -
Notes on iodefine RPDL.h when SCMR for RX62T is used in PDG2
iodefine_RPDL.h exists in the folder in a project for RX62T generated by PDG2. In the iodefine_RPDL.h. file, the definition of the BCP2 bit in the SCMR register does not exist. To use BCP2, you need to change the iodefine_RPDL.h file. Before modification, around line ...
Jun 14, 2017
Videos & Training
This video introduce the product features of RX-T series for inverter control.
https://www.renesas.com/rx-motor-control