Renesas Electronics Corporation
Search

RX62T

Not Recommended for New Designs

32-bit Microcontroller for Motor Control with Multifunctional Timer, High-speed 12-bit A/D Converter and 10-bit A/D Converter

Order Now

Overview

The RX62T Group of high-performance microcontrollers with a maximum operating frequency of 100MHz are designed for motor control. They are equipped with multifunction timers (MTU, GPT), high-speed 12-bit A/D converter, and 10-bit A/D converter for facilitating motor control. The products also incorporate many safety features to comply with the IEC60730 safety standard for home appliances. In addition to a maximum of 256KB flash and 16KB RAM on-chip memory, they have a maximum of 32KB of on-chip flash memory for data storage. 64-pin to 112-pin packages are available.

RX62T Block Diagram
Pin-Memory Diagram of RX62T standard products
Pin-Memory Diagram of RX62T High-temperature products
RX62T Block Diagram
Pin-Memory Diagram of RX62T standard products
Pin-Memory Diagram of RX62T High-temperature products

Documentation

Design & Development

Software Downloads

ECAD Models

Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.

Explore ECAD Models
Diagram of ECAD Models

Models
Type Title Date
Model - IBIS
RX62T/RX62G Group IBIS Model Rev1.00
Log in to Download ZIP 200 KB 日本語
1 item

Product Options

Applied Filters:

Support

Support Communities

Support Communities

Get quick technical support online from Renesas Engineering Community technical staff.
Get Support
Browse FAQs

FAQs

Browse our knowledge base of common questions and answers.
Browse FAQs
Submit a Ticket

Submit a Ticket

Need to ask a technical question or share confidential information?
Submit Ticket

Resources

Support Communities

  1. RX62T Excep_UndefinedInst when using S12ADA1 and IRQ0

    Hi everyone, I'm using an 64pin RX62T R5F562T7DDFM. I'm trying to use S12ADA1 (in poll mode) and IRQ0 (external pin interrupt) and I believe I get a conflict.Both work well separately, but when I generate an IRQ0 interrupt while polling S12ADA1, the program gets stuck in Excep ...

    Nov 3, 2015
  2. Can't connect to RX62T by E1 emulator

    Dears, I'm a newer to Renesas, and have a E1 emulator and a RSKRX62T evaluation board on have, also I've installed e2 studio, Renesas flash programmer, (even HEW), Here is the problem: I can find the device in the system device manager, I can also use the flash ...

    Jul 2, 2021
  3. Configure operating frequency for RX62T

    Hello All,Please help me by providing basic initialisation (Register settings) ,to start up with RX62T (100 pin) .Am using a 12Mhz crystal.Kind RegardsPrathap C Nair

    Jan 7, 2012
View All Results from Support Communities (83)

FAQs

  1. (RX62T, RX62G) I can't enter all-module stop mode.

    To enter all-module stop more, execute a WAIT instruction after setting the related registers or bits as follows. - MSTPCRA.ACSE bit = 1 (all-module clock stop mode is enabled) - SBYCR.SSBY bit = 0 (shifts to sleep mode or all-module clock stop mode after the WAIT instruction is executed ...

    May 27, 2013
  2. (RX62T, RX610, RX62G, RX63T) What types of resonator can be connected and what can you recommend?

    A crystal resonator can be used for the main clock oscillator. There are no particular resonators that we recommend.

    Jun 20, 2013
  3. Notes on iodefine RPDL.h when SCMR for RX62T is used in PDG2

    iodefine_RPDL.h exists in the folder in a project for RX62T generated by PDG2. In the iodefine_RPDL.h. file, the definition of the BCP2 bit in the SCMR register does not exist. To use BCP2, you need to change the iodefine_RPDL.h file. Before modification, around line ...

    Jun 14, 2017
View All Results from FAQs (111)

Videos & Training

This video introduce the product features of RX-T series for inverter control.
https://www.renesas.com/rx-motor-control