Overview
Description
The RL78/G13 microcontrollers balance the industry's lowest level of consumption current (CPU: 66 μA/MHz, standby (STOP): 230 nA) and a high performance of 43.2 DMIPS (32 MHz). They have an on-chip oscillator, data flash, A/D converter, and more. Built-in safety features (function that detects illegal operation of hardware) enable support for the household appliance safety standard (IEC/UL 60730). These microcontrollers can be used in a wide variety of applications from home and consumer appliances to industrial equipment.
Features
- CPU: RL78 core, Max. 32MHz
- Voltage: 1.6V to 5.5V
- Package: 64-pin HTFQFP, 24 to 48-pin HWQFN, 48 to 128-pin LFQFP, 44 to 100-pin LQFP, 20 to 30-pin LSSOP, 64-pin VFBGA, 25 to 36-pin WFLGA
- Memory: SRAM Max. 32KB, Program Flash Max. 512KB
- Timer: 16-bit Timer (ch) x 8, 8-bit Timer (ch) x 8, Watchdog Timer (ch) x 1, Interval Timer x 1 ch
- PWM: PWM Output x 7
- Analog function: 10-bit A/D Converter (ch) x 9
- On-chip Oscillator Freq. (MHz): High-Speed: 32, 24, 16, 12, 8, 4, 1MHz
Low-speed: 15kHz - Others: RTC, Power-On Reset, Low Voltage Detection
Comparison
Applications
Design & Development
Software & Tools
Sample Code
Boards & Kits
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Support Communities
-
RL78/G13 R5F1016D Data Flash on GCC compiler Toolchain: GCC for Renesas RL78 Version: 4.9.2.202201 using E2 studio configuration Type 04
How to import FDL_RL78_Type04_Installer_V200-doc-e library. How to configure linker script and C/C++ build > settings for linker to add pfdl.a
Dec 22, 2023 -
SNOOZE operating current for low voltage mode RL78/G13
Hi , I am trying to measure the peripheral current for SNOOZE mode with ADC operation at low voltage mode hence the main clock frequency drops to 4MHz . The specified typical value of the same is around 1.2 mA. But i am getting around 0.5 mA For the same ...
Apr 30, 2019 -
RL78/G13 Promotion Board question
Hello All,First of all I would like to say : "hello everybody" since I'm new. I have just start an journey into Renesas MCU world. Last week I was able to have in my hand the RL78/G13 Promotion Board. Every think works perfect exect this that I ...
Feb 13, 2012
FAQs
-
Can the RL78/G13 control an SPI using the SAU?
It is possible for the RL78/G13 to control an SPI. Set the SAU of the RL78 to CSI (3-line serial), and also prepare one port for using for the CS signal. Make the CS signal low before starting SPI communication, carry out communication using CSI, and after ...
Mar 23, 2021 -
E0204001, E1200416 Error (CS+, E1, RSK for RL78/G13)
This error occurs when the versions of the monitor program written the RL78/G13 on the CPU Board and E1 debugger monitor program are different. Immediately after the error occured, disconnect the USB cable from the E1 debugger to reset the state of the E1 debugger, then reconnect the ...
Aug 2, 2022 -
Input side and output side in the RL78/G13 clock generator circuit.
Figure 2-4. Pin Block Diagram for Pin Type 2-2-1 in 2.4 Block Diagrams of Pins in the RL78/G13 hardware manual is a block diagram of the generator circuit. A portion of it is shown below on the left. For clarity, we will label X1 ...
Aug 8, 2013
News & Blog Posts
Blog Post
Nov 28, 2023
|