Overview
Description
The SLG46826-EV programmable mixed-signal matrix IC with extended temperature range provides a small, low-power component for commonly used mixed-signal functions. The user creates their circuit design by programming the multiple-time programmable non-volatile memory (NVM) to configure the interconnect logic, the IO pins, and the macrocells of the SLG46826-EV. A dual power supply allows the device to flexibly interface two independent voltage domains. This highly versatile device allows for a wide variety of mixed-signal functions to be designed within a very small, low-power single integrated circuit.
Features
- 2 high-speed general-purpose rail-to-rail analog comparators (ACMPxH)
- 2 low-power general-purpose rail-to-rail analog comparators (ACMPxL)
- 2 voltage references (Vref)
- 2 Vref outputs
- 11 combination function macrocells
- 3 selectable DFF/LATCH or 2-bit LUTs
- 1 selectable programmable pattern generator or 2-bit LUT
- 6 selectable DFF/LATCH or 3-bit LUTs
- 1 selectable pipe delay or ripple counter, or 3-bit LUT
- 8 multi-function macrocells
- 7 selectable DFF/LATCH or 3-bit LUTs + 8-bit delay/counters
- 1 selectable DFF/LATCH or 4-bit LUT + 16-bit delay/counter
- Serial communications: I2C protocol interface
- Programmable delay with edge detector output
- Deglitch filter or edge detector
- 3 oscillators (OSC)
- 2.048kHz oscillator
- 2.048MHz oscillator
- 25MHz oscillator
- Analog temperature sensor
- Power-On Reset (POR)
- In-system debug
- Multiple-time programmable memory in development
- Wide range power supply
- 2.5V (±8%) to 5V (±10%) VDD
- 1.8V (±5%) to 5V (±10%) VDD2 (VDD2 ≤ VDD)
- Ambient operating temperature range: -40°C to +105°C
- RoHS-compliant/Halogen-free
- Available package: 20-pin STQFN: 2mm x 3mm x 0.55mm, 0.4mm pitch
Comparison
Applications
Documentation
Featured Documentation
Log in required to subscribe
|
|
|
|
|---|---|---|
| Type | Title | Date |
| Datasheet | PDF 1.88 MB | |
| Device Errata | PDF 490 KB | |
| White Paper | PDF 393 KB | |
3 items
|
||
Design & Development
Software & Tools
Software & Tools
| Software title
|
Software type
|
Company
|
|---|---|---|
| Go Configure Software Hub Go Configure Software Hub provides development support for a variety of products, including GreenPAK configurable mixed signal matrix and ForgeFPGA™ devices.
|
Software Package | Renesas |
1 item
|
||
Boards & Kits
Development
SLG46826EV-SKT
Active
GreenPAK SLG46826-EV Development Kit with Socket Adapter
The SLG46826EV-SKT is a socket adapter kit for use with the SLG4DVKADV GreenPAK™ Advanced Development Board or SLG4DVKLITE GreenPAK Lite Development Board. The SLG46826EV-SKT kit includes the SLG4SA20SP-20x30 socket adapter and 50 SLG46826-EV GreenPAK programmable mixed-signal matrix IC...
Recommended Documents:
Development
SLG4DVKADV
Active
GreenPAK Advanced Development Board
The GreenPAK Advanced Development Board provides full programming, emulation, and testing functions for the GreenPAK devices - for use with SLG46xxxX-SKT / SLG47xxxV-SKT socket kits.
It works in tandem with the GreenPAK Designer software (built into Go Configure™ Software Hub), and it allows...
Recommended Documents:
Test This Board Remotely
Available on Lab on the Cloud, use our PC-based GUI to instantly start configuring and testing designs in our virtual lab, no physical board needed.
Development
SLG4DVKLITE
Active
GreenPAK Lite Development Board
The GreenPAK Lite Development Board provides full programming, emulation, and testing functions for GreenPAK devices, working in a pair with the Go Configure™ Software Hub. Board functionality is provided by the RX66T MCU from Renesas.
Recommended Documents:
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Product Options
Applied Filters:
Videos & Training
GreenPAK Configurable Mixed-signal IC Introduction
Video List
