Overview
Description
The HIP2211 is a 100V, 3A source, 4A sink high-frequency half-bridge NMOS FET driver. The HIP2211 features standard HI/LI inputs and is pin-compatible with popular Renesas bridge drivers such as the HIP2101 and ISL2111. Its wide operating supply range of 6V to 18V and integrated high-side bootstrap diode supports driving the high-side and low-side NMOS in 100V half-bridge applications.
This driver features a strong 3A source, 4A sink driver with very fast 15ns typical propagation delay and 2ns typical delay matching, making it optimal for high-frequency switching applications. VDD and boot UVLO protects against an undervoltage operation.
The HIP2211 is offered in 8 Ld SOIC, 8 Ld 4x4mm DFN, and 10 Ld 4x4mm TDFN packages.
Features
- Drop-in replacement for the ISL2111 and HIP2101 8 Ld SOIC, 8 Ld DFN, and 10 Ld TDFN packages
- 115VDC bootstrap supply maximum voltage supports 100V on the half-bridge
- 3A source and 4A sink gate drivers for NMOS FETs
- Fast propagation delay and matching: 15ns typical delay; 2ns typical matching
- Integrated 0.5Ω typical bootstrap diode
- Wide 6V to 18V operating voltage range
- VDD and boot Undervoltage Lockout (UVLO)
- Robust noise tolerance: wide hysteresis at inputs; HS pin tolerates up to -10V continuous
- HI/LI inputs 3.3V logic compatible with VDD voltage tolerance
Comparison
Applications
Design & Development
Software & Tools
Boards & Kits
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Support Communities
-
High side of HIP2211 Gate Driver continuously high
I am developing a 3 phase motor control inverter board using HIP2211FBZ gate driver IC. I am facing an issue with the high side of the gate driver. I am giving complimentary PWM to both high side and low side and I am getting PWM on low side MOSFET. but ...
Feb 22, 2025
FAQs
-
HIP2210 / HIP2211 Typical Output Resistance
Rdson can be roughly calculated using the Low-level Output Voltage and High-Level Output voltage at 100mA sink/source respectively. This information is available in the Electrical Specifications table. Typical pull-down resistance is 1Ω and pull-up resistance is 1.6 Ω.
Apr 13, 2020 -
HIP2210 / HIP2211 Full-bridge Start-up Sequence
... it is suggested you use the same RDT on both gate driver ICs to facilitate easier controls. It is very straight forward to use the HIP2211. Just provide the supply voltage and allow both the low side and high side supply to rise above UVLO in a few hundreds of ...
Apr 14, 2020 -
HIP2210 / HIP2211 Maximum Duty Ratio
The low-side driver is biased by VDD so there is no limit in the low-side duty cycle, which means it can stay on 100% of the switching cycle. The high-side driver can stay on for as long as the boot capacitor can hold up the HB supply ...
Apr 13, 2020