Overview
Description
The ZMOD4510 gas sensor platform detects air quality in a variety of indoor and outdoor applications. The module is a 12-pin LGA assembly (standard version 3.0mm x 3.0mm x 0.7mm) that consists of a gas sense element and a CMOS signal conditioning IC. The module’s sense element consists of a heater element on a silicon-based MEMS structure and a metal-oxide (MOx) chemiresistor. The signal conditioner controls the sensor temperature and measures the MOx resistance, which is a function of the gas concentration.
The freely available firmware enables different ZMOD4510 features based on traditional and machine learning algorithms with embedded artificial intelligence (AI) using the same hardware platform. This is used to determine the Air Quality Index (AQI) output, which is based on the gases present. The measurement results can be read via an I2C interface with the user’s microprocessor, which processes the data to determine the levels of gases present and to indicate the AQI based on international standards. With its latest ultra-low power mode, the ZMOD4510 is an excellent choice for detecting ozone and nitrogen dioxide in indoor and outdoor applications.
Features
- Sensor output based on operation method:
- Non-selective measurement of nitrogen dioxide (NO2) and ozone (O3)
- Selective ozone (O3) measurement using ultra-low power
- Supports international standards for air quality, such as the US Environmental Protection Agency (EPA)
- Ultra-low average power consumption down to 0.2mW
- External reset pin (active-LOW)
- Siloxane resistant
- RoHS compliant
- Target operation temperature: -40 °C to +65 °C
- Supply voltage: 1.7V to 3.6V
- Water and dustproof version available (IP67 certified)
- Available assembly sizes:
- 3.0mm x 3.0mm x 0.7mm (standard version)
- 3.0mm x 3.0mm x 0.9mm (IP67 version)
Comparison
Applications
Documentation
Featured Documentation
Log in required to subscribe
|
|
|
|
|---|---|---|
| Type | Title | Date |
| Datasheet | PDF 782 KB | |
| Manual - Development Tools | PDF 545 KB | |
| End Of Life Notice | PDF 759 KB | |
|
3 items
|
||
Design & Development
Software & Tools
Boards & Kits
Evaluation
ZMOD4510-EVK
Obsolete
O3 and NO2 Gas Sensor Evaluation Kit
The ZMOD4510-EVK simplifies the evaluation of the ZMOD4510 Gas Sensor for O3 and NO2. This sensor module is supported with the firmware to operate the sensor in multiple modes: NO2 O3 and Ultra-Low Power (ULP O3) mode. Depending on the selected mode, the output can be displayed as a raw signal...
Recommended Documents:
Evaluation
US082-ZMOD4510EVZ
Active
Outdoor Air Quality Sensor Pmod™ Board (Renesas QuickConnect IoT)
The US082-ZMOD4510EVZ board enables quick prototyping of the ZMOD4510 gas sensor module for outdoor air quality (OAQ) in a custom system design. The board provides a standard Pmod™ Type 6A (Extended I2C) connection for the on-board sensor to plug into any required MCU evaluation kit with a...
Recommended Documents:
Evaluation
EU045-EVK
Active
Air Quality Sensor Evaluation Kit
The Renesas EU045-EVK air quality sensor kit provides real-time data about the current environmental conditions to demonstrate the use of Renesas’ ZMOD gas sensors and relative humidity/temperature sensor in an easy-to-use application. Its Bluetooth® 5.0 communication allows nice and easy...
Recommended Documents:
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Product Options
Applied Filters: